Slide height screw (idle)

[Thumper]

Originally Posted by JerryHawk250

Oh, I see what you are talking about now. I just noticed the screw head was hitting. Try filing or grinding down the case some so it can go in farther. At this point it would hurt to try.

Jerry,
Your suggestion to file down the case (stem that the idle screw threads into) a couple of mm is an excellent idea. We had the carb out and the slide is fine. The BEST solution would be a brass idle adjustment screw with a pin that is a few mm longer!

It is so hot in the garage right now, I hesitate. And, that also means it starts right up and doesn't NEED the idle elevated. I'll wait for colder weather