BD125-10 No Power After New Battery

Atipsyllama · 06-06-2022, 11:58 AM

I just finished charging the new battery, checking the voltage, and putting everything else back together on the bike and there is no power getting to the speedometer cluster at all. I checked the battery again and it is at 13.005 vdc.

What are the things to check in order so I can maybe avoid disassembling it all again?

For background, it ran fine 2 years ago, then I took it apart, swapped a damaged gas tank, installed a new carb and exhaust, installed lowering kit. And then it sat for close to 2 years.

**JerryHawk250** · 06-06-2022, 12:17 PM

I would check if the fuse is blown. If not, being that it sat for 2 years i would go through all the connectors and clean with a contact cleaner then put so dielectric grease on them. Could be just a corroded connector.

tpelle · 06-06-2022, 08:54 PM

And don't forget to check all of the grounds, and make sure that everything is attached to the frame tightly so there are good solid ground connections.

Is EVERYTHING dead, or do some things work and not others?

Atipsyllama · 06-16-2022, 09:46 PM

Everything is dead, no starter/ignition, no lights, no dash, no horn, no blinkers. Nothing. But the battery is charged and hooked up.

Where is the 5a fuse located?

Atipsyllama · 06-16-2022, 10:05 PM

Trying to upload pictures but God this site sucks for that. I took the front fairing off and there were sets of wires unplugged. Two singles, a yellow and a grey, not from the same bunch. And then a brown and green wire from the same "bunch". Here's an imgur link since I can't get any photos to attach or upload https://imgur.com/gallery/gNZWwyU

Atipsyllama · 06-16-2022, 10:06 PM

I'm just kind of lost on what specifically to check. Like with my multimeter in hand where am I specifically checking? How many points roughly? Main culprits?

TominMO · 06-16-2022, 10:24 PM

From what you describe, everything dead, first thing I'd check is the battery ground connection to the frame. Not just the connection to the battery itself. There could be corrosion at the frame, preventing a good ground. Get the frame shiny, reinstall, and cover the install point with something that prevents air from getting to it, like grease or vaseline or something.

Second would be the main fuse. It should be fairly near the battery, I would think. Good luck.

06-06-2022, 11:58 AM	#1
Atipsyllama Join Date: Apr 2020 Posts: 15	BD125-10 No Power After New Battery I just finished charging the new battery, checking the voltage, and putting everything else back together on the bike and there is no power getting to the speedometer cluster at all. I checked the battery again and it is at 13.005 vdc. What are the things to check in order so I can maybe avoid disassembling it all again? For background, it ran fine 2 years ago, then I took it apart, swapped a damaged gas tank, installed a new carb and exhaust, installed lowering kit. And then it sat for close to 2 years.
	0

06-06-2022, 12:17 PM	#2
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,721	I would check if the fuse is blown. If not, being that it sat for 2 years i would go through all the connectors and clean with a contact cleaner then put so dielectric grease on them. Could be just a corroded connector. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

06-16-2022, 10:24 PM	#7
TominMO Join Date: Sep 2021 Location: De Soto, MO Posts: 1,977	From what you describe, everything dead, first thing I'd check is the battery ground connection to the frame. Not just the connection to the battery itself. There could be corrosion at the frame, preventing a good ground. Get the frame shiny, reinstall, and cover the install point with something that prevents air from getting to it, like grease or vaseline or something. Second would be the main fuse. It should be fairly near the battery, I would think. Good luck. __________________ 2021 Lifan Xpect--sold 2022 Lifan KPX 1972 Honda CT90--The Carrot 1969 Honda CT90--The Tomahto Cheesy is the WDK (workplace drama king). Now retired. Nope, back in the saddle. Nope, finally retired. Climate: The Movie https://www.youtube.com/watch?v=A24fWmNA6lM How our government really works https://www.youtube.com/watch?v=QjadCd0VRBw Question all authority.....think for yourself
	0

06-06-2022, 08:54 PM	#3
tpelle Join Date: Mar 2022 Posts: 49	And don't forget to check all of the grounds, and make sure that everything is attached to the frame tightly so there are good solid ground connections. Is EVERYTHING dead, or do some things work and not others?
	0

06-16-2022, 09:46 PM	#4
Atipsyllama Join Date: Apr 2020 Posts: 15	Everything is dead, no starter/ignition, no lights, no dash, no horn, no blinkers. Nothing. But the battery is charged and hooked up. Where is the 5a fuse located?
	0

06-16-2022, 10:05 PM	#5
Atipsyllama Join Date: Apr 2020 Posts: 15	Trying to upload pictures but God this site sucks for that. I took the front fairing off and there were sets of wires unplugged. Two singles, a yellow and a grey, not from the same bunch. And then a brown and green wire from the same "bunch". Here's an imgur link since I can't get any photos to attach or upload https://imgur.com/gallery/gNZWwyU
	0

06-16-2022, 10:06 PM	#6
Atipsyllama Join Date: Apr 2020 Posts: 15	I'm just kind of lost on what specifically to check. Like with my multimeter in hand where am I specifically checking? How many points roughly? Main culprits?
	0