It Is Alive!!! Bwahahahahahaha - Page 43

Weldangrind · 11-17-2015, 10:59 PM

I'll be interested to learn about the success of the heat shrink.

**cheesy** · 11-19-2015, 09:46 PM

Quote:

Originally Posted by Weldangrind

I'll be interested to learn about the success of the heat shrink.

I hoped to get to it this week but no soap. Working late all week and have a booked weekend of driving to northern Wisconsin and back. Throw in an expected 10" of snow starting tomorrow night along with single digit evening temps.

I'm on vacation next week with no relatives in sight, so I have no excuse not to get them done. Might be firing up the new heater, too.

SpudRider · 11-17-2015, 11:51 PM

X2.

**cheesy** · 11-23-2015, 06:52 PM

Here we go.
Step one. Clean the schmutz from the camera lens.

What is needed.
Black RTV. Manifolds. Heat Gun. Putty knife. Scissors. Heat Shrink. Not shown, razor blade.

The crack.

I started by running the manifolds through the ultrasonic cleaner and letting them dry. While they were drying, I eyeballed and cut the heat shrink tubing.

Spread the RTV on the boots. Neatness does not count here. Go heavy on the cracks and push it in. Slime it everywhere else.

Slide the heat shrink over the boot and hit with the heat gun.

Let sit overnight for the RTV to cure.

Finish tomorrow.

SpudRider · 11-23-2015, 08:44 PM

Nice job.

That is a true, China Riders solution.

Weldangrind · 11-23-2015, 10:49 PM

Excellent idea. Do you plan to do two layers of heat shrink?

**cheesy** · 11-24-2015, 09:24 AM

Quote:

Originally Posted by Weldangrind

Excellent idea. Do you plan to do two layers of heat shrink?

I'll know better when I trim off the excess later today. I may not have enough material left to do a full layer on each.

**cheesy** · 11-24-2015, 03:38 PM

Mrs. C and I went out Christmas shopping this morning. I bought my present and she bought hers.

That gave the RTV a few more hours to set.

Done.

The heat shrink is pretty thick (.062") and quite stiff. A second layer would probably be overkill.

FastDoc · 11-24-2015, 04:08 PM

Excellent idea.

I had a 1980 or so XS400 and a 1974 or so KZ400 both of which has carb holder (boot) issues. Finding replacements was a POA, and straight RTV looks like arse. Good work, Cheesy!

SpudRider · 12-03-2015, 10:58 PM

I'm glad Mrs. Cheesy is doing well.

Thanks for posting the update.

Weldangrind · 12-04-2015, 11:53 AM

X2! So glad to hear that Mrs. C passed the test.

**cheesy** · 02-22-2016, 10:21 AM

First ride in seven weeks today.

The CX probably felt like I did this morning, slow to get started. Once it started, it settled into a nice idle. I threw on my gear* while it warmed up and away we went. 35F on the ride to work.

Gotta love those AGM batteries. I forgot to hook up to the trickle charger but found out I didn't need it. That battery is five years old, going on six.

*Still got the Village People running through my head when I get into my leather chaps.

FastDoc · 02-22-2016, 12:32 PM

It is best to block any toughts about the Village People, Cheesy. Especially since I wore chaps on my ride to work this morning also!

I'm glad that conditions have improved in your area and you are agian out on your motorcycle! You did a great job fixing that Honda, it's good that you have the pleasure of riding it.

AGM batteries are great. The OEM one on my 2007 Honda is original, and still works fine too.

**cheesy** · 02-23-2016, 08:56 PM

Quote:

Originally Posted by FastDoc

It is best to block any toughts about the Village People, Cheesy. Especially since I wore chaps on my ride to work this morning also!

I'm glad that conditions have improved in your area and you are agian out on your motorcycle! You did a great job fixing that Honda, it's good that you have the pleasure of riding it.

AGM batteries are great. The OEM one on my 2007 Honda is original, and still works fine too.

The village had the Street sweepers out today and cleared the roads of salt. Too bad it's going to snow this evening.

Weldangrind · 02-24-2016, 11:53 PM

I'm envious that you got out for a ride.

11-17-2015, 10:59 PM	#1
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I'll be interested to learn about the success of the heat shrink. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-17-2015, 11:51 PM	#3
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	X2. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-23-2015, 06:52 PM	#4
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,792	Here we go. Step one. Clean the schmutz from the camera lens. What is needed. Black RTV. Manifolds. Heat Gun. Putty knife. Scissors. Heat Shrink. Not shown, razor blade. The crack. I started by running the manifolds through the ultrasonic cleaner and letting them dry. While they were drying, I eyeballed and cut the heat shrink tubing. Spread the RTV on the boots. Neatness does not count here. Go heavy on the cracks and push it in. Slime it everywhere else. Slide the heat shrink over the boot and hit with the heat gun. Let sit overnight for the RTV to cure. Finish tomorrow. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0

11-23-2015, 08:44 PM	#5
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Nice job. That is a true, China Riders solution. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-23-2015, 10:49 PM	#6
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Excellent idea. Do you plan to do two layers of heat shrink? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-24-2015, 03:38 PM	#8
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,792	Mrs. C and I went out Christmas shopping this morning. I bought my present and she bought hers. That gave the RTV a few more hours to set. Done. The heat shrink is pretty thick (.062") and quite stiff. A second layer would probably be overkill. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0

11-24-2015, 04:08 PM	#9
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	Excellent idea. I had a 1980 or so XS400 and a 1974 or so KZ400 both of which has carb holder (boot) issues. Finding replacements was a POA, and straight RTV looks like arse. Good work, Cheesy! __________________ Happy to serve.
	0

12-03-2015, 10:58 PM	#10
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	I'm glad Mrs. Cheesy is doing well. Thanks for posting the update. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

12-04-2015, 11:53 AM	#11
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	X2! So glad to hear that Mrs. C passed the test. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

02-22-2016, 10:21 AM	#12
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,792	First ride in seven weeks today. The CX probably felt like I did this morning, slow to get started. Once it started, it settled into a nice idle. I threw on my gear* while it warmed up and away we went. 35F on the ride to work. Gotta love those AGM batteries. I forgot to hook up to the trickle charger but found out I didn't need it. That battery is five years old, going on six. *Still got the Village People running through my head when I get into my leather chaps. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	2

02-22-2016, 12:32 PM	#13
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	It is best to block any toughts about the Village People, Cheesy. Especially since I wore chaps on my ride to work this morning also! I'm glad that conditions have improved in your area and you are agian out on your motorcycle! You did a great job fixing that Honda, it's good that you have the pleasure of riding it. AGM batteries are great. The OEM one on my 2007 Honda is original, and still works fine too. __________________ Happy to serve.
	1

02-24-2016, 11:53 PM	#15
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I'm envious that you got out for a ride. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0