Gear Indicators

nonone · 08-11-2016, 01:43 AM

The problem could be in the connection as well. Often the prongs will fail or are never correct on inside the plastic connection. Sometimes you have one loose from the start and then another one or several come loose later on with vibrations. You can normally pull the connection apart and it will become obvious if there is a loose terminal. From there you just have to get a precision screwdriver or something small to push out the fins on the terminal. It's always good to make sure there is a little slack in the cables as well.

08-11-2016, 01:43 AM	#1
nonone Join Date: Jul 2014 Posts: 75	The problem could be in the connection as well. Often the prongs will fail or are never correct on inside the plastic connection. Sometimes you have one loose from the start and then another one or several come loose later on with vibrations. You can normally pull the connection apart and it will become obvious if there is a loose terminal. From there you just have to get a precision screwdriver or something small to push out the fins on the terminal. It's always good to make sure there is a little slack in the cables as well.
	0