New to me qlink(shineray) mt250

pchitti · 03-31-2014, 11:07 PM

Well finally bit the bullet and traded my headache of a hardtail cb 750/ gs550 frankenstein. Ended up getting a shineray xy250-g2. Needs some parts from what looks like multiple low speed drops. Prob from the ridiculous seat height, not sure but doesnt seem to be much slide damage.

So need a clutch lever unit, speedo/ indicator unit, front light faring, left side plastic. Also really need to find a way to get the seat height down to around 30-32 in. Any ideas on that?

pchitti · 03-31-2014, 11:08 PM

Oh if it matters at all, its a 2012.

Killerbracing · 03-31-2014, 11:36 PM

Quote:

Originally Posted by pchitti

Well finally bit the bullet and traded my headache of a hardtail cb 750/ gs550 frankenstein. Ended up getting a shineray xy250-g2. Needs some parts from what looks like multiple low speed drops. Prob from the ridiculous seat height, not sure but doesnt seem to be much slide damage.

So need a clutch lever unit, speedo/ indicator unit, front light faring, left side plastic. Also really need to find a way to get the seat height down to around 30-32 in. Any ideas on that?

Welcome to my level of hell. Take the base of the lever to a cycle shop and match it up. NEVER say it's off a china bike.

SpudRider · 03-31-2014, 11:40 PM

Welcome; we are glad you joined us.

Where do you live? You might be able to order parts from QLink in Texas.

http://store.qlinkmotor.com/

pchitti · 04-01-2014, 12:45 AM

I live in the Waco area, i thought qlink was basically defunct and worthless? I was stoked to find out for sure that it was a shineray so i would be able to find parts a bit easier. Lol

I need the entire base and all, mirror mount and every thing is broke off the top of the mount. This bike had a bad time at one point or another.

Kinda sad, but Ive gone from a bike that didnt run to a running bike I physically cant ride... need stilts until i get the rear down about 4 in.

SpudRider · 04-01-2014, 01:10 AM

If QLink is defunct, I guess I overlooked the announcement.

However, if you can identify an identical clutch lever for a Japanese motorcycle, you can easily get a replacement clutch perch, clutch lever, and mirror perch. If QLink can't get you parts, I suggest you follow Killerbracing's advice, and take the clutch lever to a motorcycle shop to see if they can find a Japanese equivalent.

pchitti · 04-01-2014, 01:18 AM

Was a post on another chinese bike forum. All ive seen is bad or no respone from qlink. They dont list the model I have on the link. Will try to contact them. Thanks!

SpudRider · 04-01-2014, 01:27 AM

You're welcome.

Here's a link to the MT250 model on the QLink website.

http://www.qlinkmotor.com/products/products.php?pid=111

pchitti · 04-01-2014, 02:11 AM

Yep but not listed on the online parts store, hopefully its an oversite. My luck they wont offer parts. Will see if they answer in the morning.

pchitti · 04-03-2014, 02:00 PM

Got in touch with qlink. Had to call the dealer line, parts dept answered. Bad new sis they cant sell to a Texas resident, only dealers. They aree checking to see if they have the parts in stock at least. So fingers crossed for stock and then contact the only dealer I know of in Texas.

pchitti · 04-03-2014, 02:19 PM

Does anyone know the comparable KTM model for the frame? Found the honda NX250 engine info, hoping to be able to scrape together a decent amount of info to keep on hand offline.

alex_in_az · 04-03-2014, 07:11 PM

wow that looks pretty impressive! I bet it's a ton of fun to ride with 24 horse and only weighing 280#

Quote:

Originally Posted by SpudRider

You're welcome.

Here's a link to the MT250 model on the QLink website.

http://www.qlinkmotor.com/products/products.php?pid=111

culcune · 04-03-2014, 07:47 PM

You must have bought an importers sample or something along those lines. From what I understood, Qlink never imported these in any significant number; my guess is dealer sample numbers. That might be why you have damages as it was used as a Guinea pig of sorts. Not saying you don't have the bike, but rather you have possibly the ONLY bike (in the US)!

pchitti · 04-04-2014, 12:47 AM

I did pick it up in garland tx. Lol would he my luck and have no part support for it.

Will take some pics in the morning. Spenr most of today deciding what to save, replace oem or aftermarket, and trying to get it tuned. Running rich as a pig, but I cant ride it till i get a few inches off the seat height. Its like unwrapping christmas gifts but jot being able to play.

katoranger · 04-04-2014, 10:14 AM

Taobao will be your new friend.

03-31-2014, 11:07 PM	#1
pchitti Join Date: Mar 2014 Posts: 165	New to me qlink(shineray) mt250 Well finally bit the bullet and traded my headache of a hardtail cb 750/ gs550 frankenstein. Ended up getting a shineray xy250-g2. Needs some parts from what looks like multiple low speed drops. Prob from the ridiculous seat height, not sure but doesnt seem to be much slide damage. So need a clutch lever unit, speedo/ indicator unit, front light faring, left side plastic. Also really need to find a way to get the seat height down to around 30-32 in. Any ideas on that?
	0

03-31-2014, 11:40 PM	#4
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Welcome; we are glad you joined us. Where do you live? You might be able to order parts from QLink in Texas. http://store.qlinkmotor.com/ __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

04-01-2014, 01:10 AM	#6
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	If QLink is defunct, I guess I overlooked the announcement. However, if you can identify an identical clutch lever for a Japanese motorcycle, you can easily get a replacement clutch perch, clutch lever, and mirror perch. If QLink can't get you parts, I suggest you follow Killerbracing's advice, and take the clutch lever to a motorcycle shop to see if they can find a Japanese equivalent. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

04-01-2014, 01:27 AM	#8
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	You're welcome. Here's a link to the MT250 model on the QLink website. http://www.qlinkmotor.com/products/products.php?pid=111 __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

04-03-2014, 07:47 PM	#13
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,035	You must have bought an importers sample or something along those lines. From what I understood, Qlink never imported these in any significant number; my guess is dealer sample numbers. That might be why you have damages as it was used as a Guinea pig of sorts. Not saying you don't have the bike, but rather you have possibly the ONLY bike (in the US)! __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

03-31-2014, 11:08 PM	#2
pchitti Join Date: Mar 2014 Posts: 165	Oh if it matters at all, its a 2012.
	0

04-01-2014, 12:45 AM	#5
pchitti Join Date: Mar 2014 Posts: 165	I live in the Waco area, i thought qlink was basically defunct and worthless? I was stoked to find out for sure that it was a shineray so i would be able to find parts a bit easier. Lol I need the entire base and all, mirror mount and every thing is broke off the top of the mount. This bike had a bad time at one point or another. Kinda sad, but Ive gone from a bike that didnt run to a running bike I physically cant ride... need stilts until i get the rear down about 4 in.
	0

04-01-2014, 01:18 AM	#7
pchitti Join Date: Mar 2014 Posts: 165	Was a post on another chinese bike forum. All ive seen is bad or no respone from qlink. They dont list the model I have on the link. Will try to contact them. Thanks!
	0

04-01-2014, 02:11 AM	#9
pchitti Join Date: Mar 2014 Posts: 165	Yep but not listed on the online parts store, hopefully its an oversite. My luck they wont offer parts. Will see if they answer in the morning.
	0

04-03-2014, 02:00 PM	#10
pchitti Join Date: Mar 2014 Posts: 165	Got in touch with qlink. Had to call the dealer line, parts dept answered. Bad new sis they cant sell to a Texas resident, only dealers. They aree checking to see if they have the parts in stock at least. So fingers crossed for stock and then contact the only dealer I know of in Texas.
	0

04-03-2014, 02:19 PM	#11
pchitti Join Date: Mar 2014 Posts: 165	Does anyone know the comparable KTM model for the frame? Found the honda NX250 engine info, hoping to be able to scrape together a decent amount of info to keep on hand offline.
	0

04-04-2014, 12:47 AM	#14
pchitti Join Date: Mar 2014 Posts: 165	I did pick it up in garland tx. Lol would he my luck and have no part support for it. Will take some pics in the morning. Spenr most of today deciding what to save, replace oem or aftermarket, and trying to get it tuned. Running rich as a pig, but I cant ride it till i get a few inches off the seat height. Its like unwrapping christmas gifts but jot being able to play.
	0

04-04-2014, 10:14 AM	#15
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Taobao will be your new friend. __________________ You meet the nicest people on a Honda Clone.
	0