06 Diamo LS200 front wheel spacer

broseph09 · 08-03-2018, 04:37 PM

Hi all, I'm new to this forum and did as much searching as I can and haven't found a good answer yet.

I took my front wheel off to fix a flat tire and in the process lost the spacer from it. Does anyone know what part will work for a replacement? From what I can find the bike is modeled off of a honda xr200 but I haven't been able to find a reliable answer for what size spacer I need for it. Any help is appreciated!!

broseph09 · 08-05-2018, 08:26 PM

bump

broseph09 · 08-16-2018, 10:56 PM

bump

Gh426 · 08-17-2018, 02:04 AM

Are there 2 spacers or just one on one side? Washers as shims? a cheap socket drilled out that fits the space? I've fred flintstoned stuff, may not be the best solution but...

g

Weldangrind · 08-17-2018, 11:23 AM

Which side is the spacer supposed to be on?

Craig Rushton · 08-17-2018, 05:46 PM

on the disc brake side. the side with the speedometer wheel already has a spacer secured with a split ring.

Weldangrind · 08-20-2018, 11:26 AM

Do you have a vernier caliper? If not, a cheap one from HF will do the job. Measure the seal hole that the spacer fits into. Measure the axle diameter where the spacer rides. Try to figure out how long the spacer should be.

08-03-2018, 04:37 PM	#1
broseph09 Join Date: Aug 2018 Posts: 3	06 Diamo LS200 front wheel spacer Hi all, I'm new to this forum and did as much searching as I can and haven't found a good answer yet. I took my front wheel off to fix a flat tire and in the process lost the spacer from it. Does anyone know what part will work for a replacement? From what I can find the bike is modeled off of a honda xr200 but I haven't been able to find a reliable answer for what size spacer I need for it. Any help is appreciated!!
	0

08-17-2018, 11:23 AM	#5
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Which side is the spacer supposed to be on? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-20-2018, 11:26 AM	#7
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Do you have a vernier caliper? If not, a cheap one from HF will do the job. Measure the seal hole that the spacer fits into. Measure the axle diameter where the spacer rides. Try to figure out how long the spacer should be. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-05-2018, 08:26 PM	#2
broseph09 Join Date: Aug 2018 Posts: 3	bump
	0

08-16-2018, 10:56 PM	#3
broseph09 Join Date: Aug 2018 Posts: 3	bump
	0

08-17-2018, 02:04 AM	#4
Gh426 Join Date: Feb 2018 Location: LA Posts: 74	Are there 2 spacers or just one on one side? Washers as shims? a cheap socket drilled out that fits the space? I've fred flintstoned stuff, may not be the best solution but... g
	0

08-17-2018, 05:46 PM	#6
Craig Rushton Join Date: Jul 2018 Posts: 6	on the disc brake side. the side with the speedometer wheel already has a spacer secured with a split ring.
	0