I guess I'm a china rider again

Wild_Alaskan · 11-11-2013, 12:53 AM

Just picked up a rocketa 110 for $120 today. Going to be swapping an lifan 125 engine i have laying around in to it soon since I am pretty sure this one is based off of the crf50. Ill get some pictures tomorrow.

SpudRider · 11-11-2013, 01:26 AM

Good for you!

katoranger · 11-11-2013, 09:09 AM

You back to Montana now? The engine should be an easy swap for you.

FastDoc · 11-11-2013, 12:21 PM

He could probably do it over dinner and a beer.

Wild_Alaskan · 11-11-2013, 12:36 PM

yep back in montana

Weldangrind · 11-11-2013, 01:20 PM

Quote:

Originally Posted by Wild_Alaskan

Just picked up a rocketa 110 for $120 today. Going to be swapping an lifan 125 engine i have laying around in to it soon since I am pretty sure this one is based off of the crf50. Ill get some pictures tomorrow.

Is it a pit bike? What size are the wheels?

Wild_Alaskan · 11-11-2013, 01:36 PM

yeah its a pit bike, not sure but I would guess the wheels are 10"

FastDoc · 11-11-2013, 02:15 PM

You will have a lot of fun running around on that.

Wild_Alaskan · 11-11-2013, 08:12 PM

Here are some pictures, I belive I have this model of bike

http://www.roketa.com/product/produc...D=0&proID=2069

mine has a 12" 10" tire setup though.

I got the lifan engine mostly installed but somehow misplaced my new carburetor, hopefully i can finish tomorrow.

SpudRider · 11-12-2013, 12:40 AM

That puppy should move with a 125cc engine in it.

We eagerly await additional photos.

Wild_Alaskan · 11-12-2013, 06:38 PM

Finished up the motor install today, It not running perfectly yet but moves right along for a pit bike. Going to work on the jetting soon.

Needed to make a little bit of clearance for the carburetor, otherwise the transition was really smooth

SpudRider · 11-12-2013, 09:00 PM

Nice work!

How did you cut the cooling fins?

Wild_Alaskan · 11-13-2013, 03:44 PM

i was going to grind them down with my angle grinder but it was in storage so i ended up using a chisel instead, actually came out really good

katoranger · 11-13-2013, 03:53 PM

The Chinese would have used the same tools at the factory.

Wild_Alaskan · 11-13-2013, 08:27 PM

Fixed my poor running today, I replaced the wiring harness with the one that came with the motor, the other one must have had a short which explains why both motors initially had the same running issues.

11-11-2013, 12:53 AM	#1
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	I guess I'm a china rider again Just picked up a rocketa 110 for $120 today. Going to be swapping an lifan 125 engine i have laying around in to it soon since I am pretty sure this one is based off of the crf50. Ill get some pictures tomorrow. __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

11-11-2013, 01:26 AM	#2
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Good for you! __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-11-2013, 09:09 AM	#3
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	You back to Montana now? The engine should be an easy swap for you. __________________ You meet the nicest people on a Honda Clone.
	0

11-11-2013, 12:21 PM	#4
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	He could probably do it over dinner and a beer. __________________ Happy to serve.
	0

11-11-2013, 12:36 PM	#5
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	yep back in montana __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

11-11-2013, 01:36 PM	#7
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	yeah its a pit bike, not sure but I would guess the wheels are 10" __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

11-11-2013, 02:15 PM	#8
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	You will have a lot of fun running around on that. __________________ Happy to serve.
	0

11-11-2013, 08:12 PM	#9
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	Here are some pictures, I belive I have this model of bike http://www.roketa.com/product/produc...D=0&proID=2069 mine has a 12" 10" tire setup though. I got the lifan engine mostly installed but somehow misplaced my new carburetor, hopefully i can finish tomorrow. __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

11-12-2013, 12:40 AM	#10
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	That puppy should move with a 125cc engine in it. We eagerly await additional photos. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-12-2013, 06:38 PM	#11
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	Finished up the motor install today, It not running perfectly yet but moves right along for a pit bike. Going to work on the jetting soon. Needed to make a little bit of clearance for the carburetor, otherwise the transition was really smooth __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

11-12-2013, 09:00 PM	#12
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Nice work! How did you cut the cooling fins? __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-13-2013, 03:44 PM	#13
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	i was going to grind them down with my angle grinder but it was in storage so i ended up using a chisel instead, actually came out really good __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

11-13-2013, 03:53 PM	#14
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	The Chinese would have used the same tools at the factory. __________________ You meet the nicest people on a Honda Clone.
	0

11-13-2013, 08:27 PM	#15
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	Fixed my poor running today, I replaced the wiring harness with the one that came with the motor, the other one must have had a short which explains why both motors initially had the same running issues. __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0