|
05-29-2020, 10:43 PM | #1 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Looking forward to hearing your thoughts on that new air filter.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
05-30-2020, 01:11 AM | #2 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,006
|
I will definitely weigh in on it for sure. I think it will work out perfectly.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
06-02-2020, 01:47 PM | #3 | |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,006
|
Quote:
Out of the box, it is a very nicely constructed unit. The filter element reminds me a lot of the Bikemaster brand version of a K&N, and the construction as a whole seems to be of very good quality. It is a washable/reusable filter, and if you added one of those pre-filter socks it would probably be ok off road, although I think I would avoid very dusty situations. The front end is even open with a reverse cone filter cap for a little more surface area. I don't doubt this filter will flow more than sufficiently for any bike here. Fitment for my setup is absolutely perfect. I do need to slightly reloate my crankcase breather tube, but it isn't interfering too badly. As it sits in these shots it is not touching any other part of the bike. It is a little close to the side panel here, but I could also angle the filter down some and likely gain a little more room if needed. I like this position personally, it keeps the element up higher and away from potential spray.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
|
|
|
|
|