|
12-29-2014, 01:56 PM | #1 |
Join Date: Dec 2014
Location: las vegas
Posts: 10
|
just make sure your fuel petcock is connected and take the others off for testing, you should have 2 ports on your intake manifold, make 1 the fuel petcock, and the other the vacuum line from the carburetor and see what id does, those t fittings in the vac system always leak. If not that check your valves
__________________
http://www.mmsscooters.com 2012 Jonway X 44mm Hoca crank 52mm Hoca big bore MMS big valve head raised ports, polished, milled .023 Hoca 26mm carb NCY titanium valve springs NOS wet nitrous system Holley fuel pump MMS variator Naraku CDI HT coil 4' Wheelie bar MMG stainless slip-on exhaust NGK "11" spark plug UNI filter |
|
|
|
|
|