|
08-14-2013, 10:11 PM | #1 |
Join Date: Feb 2011
Posts: 141
|
Are you currently running the stock 15 tooth countershaft sprocket with a 44 rear or have you stepped up to a 16 tooth front? Full exhaust system including header or a slip-on silencer? Base line jetting should start with a 125 or 127.5 main jet (buy both jets just in case), a 35 pilot jet (Mikuni smooth side) and the needle on the 4th clip position. This should do until you decide to change to a K&N pod style airfilter, also please include a picture of your exhaust problem with what bolts are not lining up.
__________________
Bikes: Yamaha 1974 Yz125a, Yamaha 1974 Sc500, Yamaha 1977 Rd400, Yamaha 1978 Yz125, 1988 Harley Davidson Xlh 883, 2006 Ktm 450 smr, Ekeleton 2006 Beast 200cc the worst bike I have ever owned |
|
08-17-2013, 03:56 PM | #2 |
Join Date: Aug 2013
Posts: 32
|
15 front 44 rear and full exhaust header and tip I hv a 127.5 main jet and its running lean. Is it because I don't hace the 35 pilet and needle clip at4th? And would you say the drz stage 2 cam would be the best for this bike for more power?
Would you know of tue best way to set up this bike for stunting or is that imposible? |
|
|
|
|
|