Have Some Questions about my Huawin Cheetah200

[Mailman]

Ive had some extra time on my hands since i crushed 2 fingers, But i was wondering if anyone knew what i would need to do to make this bike have a lil more balls. its completely Stock right now, and i wanted to know what performance parts would match up to this and which ones to get. (My first Bike other than a moped).

[Weldangrind]

Welcome!

We'll have an easier time recommending mods if we can see a picture. Please show us your bike.

[Mailman]

I attached the pictures hopfully you can see them

[Mailman]

Sorry about the missing plastic im currently attempting to paint it.

[alex_in_az]

That looks almost identical to my Panterra 125. where are you located OP?

[Mailman]

I live in Bangor, Maine

[Mailman]

I want to buy a performance exhaust, and airfilter and i read on some other guys post from 2008 he put a 30mm carburetor on it i just want to know where to find these things and what to ask for that would match up to mine.

For example if i went to my local automatic distributors what would i tell them the kind of bike i need it for?

[SpudRider]

Welcome; we are glad you joined us. I like the headlight on your bike.

[Mailman]

This seems like a good place to get advise and ideas im excited to join you all

[Weldangrind]

I can help with that. As it happens, I have nearly the same bike.

Start with a 30mm Mikuni, like you've indicated. Like this: http://www.ebay.com/itm/30MM-MIKUNI-CARBURETOR-CRF-XR-100-200-250-CARB-ATV-CA09-/140749566922?pt=Motorcycles_Parts_Accessories&hash =item20c553f3ca&vxp=mtr Jets are cheap and plentiful for the 30mm Mikuni. Start with a 25 slow jet and a 110 main.


The stock airbox is fine, and you can use bulk Uni foam as a filter material: http://www.ebay.com/itm/UNI-FILTER-BULK-FOAM-/360814108503?pt=Motors_ATV_Parts_Accessories&hash= item5402325f57&vxp=mtr I use Maxima Fab1 filter spray oil, which is available at most motorcycle shops.


If you want to try a pod filter, it's hard to beat this one: http://www.ebay.com/itm/42mm-SPONGE-AIR-FILTER-FIT-PIT-BIKES-DIRT-BIKES-/321315058942?pt=Motors_ATV_Parts_Accessories&hash= item4acfdeb4fe&vxp=mtr Again, Maxima Fab1.


I'm not sure what performance exhausts exist that will bolt on, but it would likely be easy to install an FMF universal muffler: http://www.ebay.com/itm/FMF-TurbineCore-2-Universal-2-Stroke-Spark-Arrestor-SILENCER-1-1-4-020303-/330966285652?pt=Motorcycles_Parts_Accessories&hash =item4d0f20bd54&vxp=mtr It's designed as a two-stroke muffler, but that doesn't matter. You can pack it with four stroke packing if you wish. I would.


That's a good start. If you perform these mods, your bike will wake up a little, but it will never be a freeway flyer. If you want a bigger cylinder and piston, that stuff is cheap as well.