LOTS of LIFAN GY-5 parts AND motor parts

Wild_Alaskan · 05-07-2013, 09:21 PM

Everything you see here as well as a front wheel and a COMPLETE PARTS MOTOR (167FML pushrod version) I can pick parts off of as needed. I may have other parts that are not visible in the photo, PM for condition of parts or better photos I'm letting them go cheap to those in need. :wink:

Weldangrind · 05-08-2013, 01:26 AM

Shipping from AK or MT? I'd be interested in the pushrod motor, but shipping might be prohibitively expensive for me.

Weldangrind · 05-08-2013, 01:27 AM

Do you have a good set of plastic side covers? Got a close-up pic of them?

Wild_Alaskan · 05-08-2013, 01:55 AM

The upper white one has a little crack below the rear screw hole and was damaged by a forklift when it was being unloaded from the barge

Shipping is from alaska so the entire motor would probably not be possible, I think the valves and bore have been damaged from getting stored out side anyways

Weldangrind · 05-08-2013, 02:03 AM

I think that those would require more fab work than the GY150 covers I already bought. Is the tank plastic? Got a pic?

Wild_Alaskan · 05-08-2013, 02:18 AM

I am planing on using the gas tank for the buggy project actually

Weldangrind · 05-08-2013, 10:06 AM

Ok, thanks anyway. I can't think of anything else I can use.

edtardo · 05-09-2013, 06:05 PM

How much would you let the motor go for?

Wild_Alaskan · 05-09-2013, 10:16 PM

The motor has a bad top end from sitting out side and shipping from alaska would be $100+

NewEnglandTrails · 05-26-2013, 07:47 AM

I'd be interested in the front headlight housing if its still around... I have a Roketa db 05 and the housing is cracked in two. I see it in your o.p. but barely. Any chance on a front and back photo..?

bogieboy · 05-26-2013, 09:05 AM

Is the harness i spy complete? If so how much shipped to 60473? Thanks!

edtardo · 05-26-2013, 11:24 AM

I think that is a polisport mmx headlight

Wild_Alaskan · 05-26-2013, 01:19 PM

Quote:

Originally Posted by NewEnglandTrails

I'd be interested in the front headlight housing if its still around... I have a Roketa db 05 and the housing is cracked in two. I see it in your o.p. but barely. Any chance on a front and back photo..?

Hi it isnt a stock headlight it is a polisport as edtardo said. I will mount up to the stock mount on a gy-5 through the two upper holes. I never made a bracket for securing it better because it really didnt end up needing one. It is wired in to a plug for the gy-5.

Quote:

Originally Posted by bogieboy

Is the harness i spy complete? If so how much shipped to 60473? Thanks!

I will have to double check but i believe it is complete except for the engine plug has been converted to bullet connectors because I was using it on my 400cc motor conversion. It would be pretty easy to convert back to the stock plug.

my first wiring harness failed and it took over a year of searching to find one that would work because they changed the wiring harness between years and countrys that the bikes were shipped to ( still had to change the turn signal wires on the bike to match this one). if you would like I can take pictures of all the connectors and you can compare it to yours.

bogieboy · 05-26-2013, 01:22 PM

Quote:

Originally Posted by Wild_Alaskan

Hi it isnt a stock headlight it is a polisport as edtardo said. I will mount up to the stock mount on a gy-5 through the two upper holes. I never made a bracket for securing it better because it really didnt end up needing one. It is wired in to a plug for the gy-5.

I will have to double check but i believe it is complete except for the engine plug has been converted to bullet connectors because I was using it on my 400cc motor conversion. It would be pretty easy to convert back to the stock plug.

my first wiring harness failed and it took over a year of searching to find one that would work because they changed the wiring harness between years and countrys that the bikes were shipped to ( still had to change the turn signal wires on the bike to match this one). if you would like I can take pictures of all the connectors and you can compare it to yours.

i wont have the bike in my hands till saturday...LOL,i am know it needs a new harness, as the PO hacked it all up...at least he admits it...LOL
ifplugs dont match up thats not thebiggest issue forme to dealwith...LOLilike bullet connectors...easier to crimp than the stupid molex plug style....although i have acess to those too....LOL

nyvdub89 · 06-08-2013, 01:49 PM

Hello Wild_Alaskan I was wondering if you had the throttle grip assembly for sale? I also need the choke cable, headlight plastic, and front brake booster if you have it available. Thanks man!

05-07-2013, 09:21 PM	#1
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	LOTS of LIFAN GY-5 parts AND motor parts Everything you see here as well as a front wheel and a COMPLETE PARTS MOTOR (167FML pushrod version) I can pick parts off of as needed. I may have other parts that are not visible in the photo, PM for condition of parts or better photos I'm letting them go cheap to those in need. :wink: __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

05-08-2013, 01:26 AM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Shipping from AK or MT? I'd be interested in the pushrod motor, but shipping might be prohibitively expensive for me. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

05-08-2013, 01:27 AM	#3
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Do you have a good set of plastic side covers? Got a close-up pic of them? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

05-08-2013, 01:55 AM	#4
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	The upper white one has a little crack below the rear screw hole and was damaged by a forklift when it was being unloaded from the barge Shipping is from alaska so the entire motor would probably not be possible, I think the valves and bore have been damaged from getting stored out side anyways __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

05-08-2013, 02:03 AM	#5
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I think that those would require more fab work than the GY150 covers I already bought. Is the tank plastic? Got a pic? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

05-08-2013, 02:18 AM	#6
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	I am planing on using the gas tank for the buggy project actually __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

05-08-2013, 10:06 AM	#7
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Ok, thanks anyway. I can't think of anything else I can use. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

05-09-2013, 06:05 PM	#8
edtardo Join Date: Mar 2012 Location: Altoona, Fl Posts: 158	How much would you let the motor go for? __________________ NewStar DB 200 Facts are meaningless. You could use facts to prove anything that's even remotely true! --Homer Simpson
	0

05-09-2013, 10:16 PM	#9
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	The motor has a bad top end from sitting out side and shipping from alaska would be $100+ __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

05-26-2013, 07:47 AM	#10
NewEnglandTrails Join Date: Sep 2006 Location: The Quiet Corner of CT. Posts: 387	I'd be interested in the front headlight housing if its still around... I have a Roketa db 05 and the housing is cracked in two. I see it in your o.p. but barely. Any chance on a front and back photo..? __________________ 2006 HIBIRD QH200-st atv, 2005 Kinroad 200GY-01, 2006 Roketa DB-05, 1980 Kawasaki KZ440 LTD
	0

05-26-2013, 09:05 AM	#11
bogieboy Join Date: May 2013 Location: finger lakes NY Posts: 2,042	Is the harness i spy complete? If so how much shipped to 60473? Thanks!
	0

05-26-2013, 11:24 AM	#12
edtardo Join Date: Mar 2012 Location: Altoona, Fl Posts: 158	I think that is a polisport mmx headlight __________________ NewStar DB 200 Facts are meaningless. You could use facts to prove anything that's even remotely true! --Homer Simpson
	0

06-08-2013, 01:49 PM	#15
nyvdub89 Join Date: Jun 2013 Location: Hudson Valley NY Posts: 98	Hello Wild_Alaskan I was wondering if you had the throttle grip assembly for sale? I also need the choke cable, headlight plastic, and front brake booster if you have it available. Thanks man! Last edited by nyvdub89; 06-08-2013 at 02:15 PM. Reason: gramatic error
	0