anthonyfa18's gy6 carb on beast 200cc and updats - Page 9

waynev · 08-15-2010, 05:47 PM

Quote:

Originally Posted by anthonyfa18

lol but i don't thing our frame will hold the power of a 450cc motor

100% agreed, i washed mine a few weeks back and now i'am spotting lots of rust at most of the joints on the frame which tells me there's lots of incomplete welds or cracks there.

mizke · 08-15-2010, 05:56 PM

that sucks guys, i only get rust on my exhaust, and bolts..

my atv stays outside under a tree with a cover.. no rust on the frame.. all my frame welds look nice and good, no complaints there.. even my dad who has built him self 2 sand rails from paper plans only even said the frame welds look good, but my brother n law's welds on the exhuast look like shit

anthonyfa18 · 08-15-2010, 10:37 PM

Quote:

Originally Posted by waynev

Quote:

Originally Posted by anthonyfa18

lol but i don't thing our frame will hold the power of a 450cc motor

100% agreed, i washed mine a few weeks back and now i'am spotting lots of rust at most of the joints on the frame which tells me there's lots of incomplete welds or cracks there.

ya me too so this winter i will be sanding and repaint it and if i have too even some re welds i will. i will also a sealer over the paint too. i was also thing of filling the frame with foaming urethane but that might be a bit to extreme

mizke · 08-16-2010, 04:05 PM

hey dude if you are wanting to run a honda swingarm..

try and find pictures of the new limited edition gio beast.. if you go to giobikes.com and then go to atv's and click on the 2010 gi beast limited edition.. you can see in the pictures and they state " a new honda style rear axle".. it is a exact copy of a honda rear axle and the part of the swing arm that attaches to the axle is a honda "style" attachment

waynev · 08-16-2010, 05:11 PM

Quote:

Originally Posted by mizke

hey dude if you are wanting to run a honda swingarm..

try and find pictures of the new limited edition gio beast.. if you go to giobikes.com and then go to atv's and click on the 2010 gi beast limited edition.. you can see in the pictures and they state " a new honda style rear axle".. it is a exact copy of a honda rear axle and the part of the swing arm that attaches to the axle is a honda "style" attachment

The new style swingarm that they use on the T3 and Beast Ltd edition is totally different than ours on a std beast, you'd have to totally redesign the chassis where it bolts on to use it, for the time and effort i would probably sell my beast and start over with a T3.

mizke · 08-16-2010, 05:18 PM

i see, i couldnt mind any pics of where it mounts..

plus the t3 frame looks super weak in front of the motor..

but if some one has a t3 atleast they could run a honda rear axle

anthonyfa18 · 08-23-2010, 11:03 PM

mabe a yamaha swing arm will fit our beast

mizke · 08-23-2010, 11:06 PM

mid 90's warrior swingarms looks like they would work for where the axle bolts on with minor mods..

but as to where it bolts to the frame i dont see it working.. but i need to see one up close in person while being able to look at my quad to.. but you could always buy a used one and see if it will work and what mods needs to be done to it.. if it cant work just turn around and sell it

anthonyfa18 · 03-14-2011, 04:50 PM

hey guys i am back i am so sorry i was buzy help my brother inlaw with his hockey seson. in the comming weekes i will be updating my beast agian. all you need to know will be here.

anthonyfa18 · 03-20-2011, 02:47 AM

update

6 months passed sines the last time i started my beast and it did not want to start. so after takeing a look at it i found the my rubber tube intake got all eaten in the in side by the gas and the out side got hard as a rock. so now i will make out aluminum. but now i am thing to by a 250cc 30mm gy6 carb sinse i am making a new intake ???

shoud i get 30mm or keep mine ???

ps:i mabe also thing of selling my best to get a honda trx 400ex or 450r

anthonyfa18 · 03-27-2011, 10:38 PM

:twisted: Update :twisted:

i order my 30mm gy6 carb and will post pic, the build is on :twisted:

more updates to come

Weldangrind · 03-28-2011, 01:12 AM

I'm curious to see if there will be a performance increase over the GY6 carb you have already. I wonder how big is too big for these engines.

anthonyfa18 · 04-03-2011, 10:20 PM

:twisted: update :twisted:

friday my new carb came in the mail, pic soon and today i replace my swing arm bushing. so far so good on the rebuild

Weldangrind · 04-03-2011, 10:21 PM

Are you installing Yamaha bushings?

anthonyfa18 · 04-04-2011, 10:29 PM

Quote:

Originally Posted by Weldangrind

Are you installing Yamaha bushings?

ya i use the part number u used

08-23-2010, 11:03 PM	#127
anthonyfa18 Join Date: Nov 2009 Location: montreal Posts: 242	mabe a yamaha swing arm will fit our beast __________________ 2008 gio beast 200cc mod list YTX14-BS battery mod,gy6 carb 250cc,custom intake,125cc cf dirtbike muffler,MPR filter/intake,performance cdi,ngk iridium xi dpr8eix-9,performance coil pack and wire, pro taper handle bar, Gio air shocks, yam swing arm bus
	0

03-14-2011, 04:50 PM	#129
anthonyfa18 Join Date: Nov 2009 Location: montreal Posts: 242	hey guys i am back i am so sorry i was buzy help my brother inlaw with his hockey seson. in the comming weekes i will be updating my beast agian. all you need to know will be here. __________________ 2008 gio beast 200cc mod list YTX14-BS battery mod,gy6 carb 250cc,custom intake,125cc cf dirtbike muffler,MPR filter/intake,performance cdi,ngk iridium xi dpr8eix-9,performance coil pack and wire, pro taper handle bar, Gio air shocks, yam swing arm bus
	0

03-20-2011, 02:47 AM	#130
anthonyfa18 Join Date: Nov 2009 Location: montreal Posts: 242	update 6 months passed sines the last time i started my beast and it did not want to start. so after takeing a look at it i found the my rubber tube intake got all eaten in the in side by the gas and the out side got hard as a rock. so now i will make out aluminum. but now i am thing to by a 250cc 30mm gy6 carb sinse i am making a new intake ??? shoud i get 30mm or keep mine ??? ps:i mabe also thing of selling my best to get a honda trx 400ex or 450r __________________ 2008 gio beast 200cc mod list YTX14-BS battery mod,gy6 carb 250cc,custom intake,125cc cf dirtbike muffler,MPR filter/intake,performance cdi,ngk iridium xi dpr8eix-9,performance coil pack and wire, pro taper handle bar, Gio air shocks, yam swing arm bus
	0

03-27-2011, 10:38 PM	#131
anthonyfa18 Join Date: Nov 2009 Location: montreal Posts: 242	:twisted: Update :twisted: i order my 30mm gy6 carb and will post pic, the build is on :twisted: more updates to come __________________ 2008 gio beast 200cc mod list YTX14-BS battery mod,gy6 carb 250cc,custom intake,125cc cf dirtbike muffler,MPR filter/intake,performance cdi,ngk iridium xi dpr8eix-9,performance coil pack and wire, pro taper handle bar, Gio air shocks, yam swing arm bus
	0

03-28-2011, 01:12 AM	#132
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I'm curious to see if there will be a performance increase over the GY6 carb you have already. I wonder how big is too big for these engines. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-15-2010, 05:56 PM	#122
mizke Join Date: Aug 2010 Location: austin, tx Posts: 1,452	that sucks guys, i only get rust on my exhaust, and bolts.. my atv stays outside under a tree with a cover.. no rust on the frame.. all my frame welds look nice and good, no complaints there.. even my dad who has built him self 2 sand rails from paper plans only even said the frame welds look good, but my brother n law's welds on the exhuast look like shit
	0

08-16-2010, 04:05 PM	#124
mizke Join Date: Aug 2010 Location: austin, tx Posts: 1,452	hey dude if you are wanting to run a honda swingarm.. try and find pictures of the new limited edition gio beast.. if you go to giobikes.com and then go to atv's and click on the 2010 gi beast limited edition.. you can see in the pictures and they state " a new honda style rear axle".. it is a exact copy of a honda rear axle and the part of the swing arm that attaches to the axle is a honda "style" attachment
	0

08-16-2010, 05:18 PM	#126
mizke Join Date: Aug 2010 Location: austin, tx Posts: 1,452	i see, i couldnt mind any pics of where it mounts.. plus the t3 frame looks super weak in front of the motor.. but if some one has a t3 atleast they could run a honda rear axle
	0

08-23-2010, 11:06 PM	#128
mizke Join Date: Aug 2010 Location: austin, tx Posts: 1,452	mid 90's warrior swingarms looks like they would work for where the axle bolts on with minor mods.. but as to where it bolts to the frame i dont see it working.. but i need to see one up close in person while being able to look at my quad to.. but you could always buy a used one and see if it will work and what mods needs to be done to it.. if it cant work just turn around and sell it
	0

04-03-2011, 10:20 PM	#133
anthonyfa18 Join Date: Nov 2009 Location: montreal Posts: 242	:twisted: update :twisted: friday my new carb came in the mail, pic soon and today i replace my swing arm bushing. so far so good on the rebuild __________________ 2008 gio beast 200cc mod list YTX14-BS battery mod,gy6 carb 250cc,custom intake,125cc cf dirtbike muffler,MPR filter/intake,performance cdi,ngk iridium xi dpr8eix-9,performance coil pack and wire, pro taper handle bar, Gio air shocks, yam swing arm bus
	0

04-03-2011, 10:21 PM	#134
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Are you installing Yamaha bushings? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0