What did you BUY today? - Page 58

**JerryHawk250** · 02-21-2018, 07:56 AM

I order new 500w crossovers, 300w tweeters and 200w midrange speakers. My DJ speakers took a beating after 3 Mardi Gras parades, I blew 2 tweeters , one midrange and one of the crossovers fried. This was on my 30+ year old Custom built speakers. 15" are still kicking. First time I had to replace speakers. My newer Dual 15's had no problems. What I get I kick out of is some of these DJ's had 6-10 speakers on some of these floats and sounded like total crap. I got a few looks with only 4 speakers setup and sounded better than there system with only 4 speakers. lol One guy wanted to know were I got the speakers from. When I told him I made them he wanted to know how much I charge to build him some. I hope the new tweeters and mids hold up a good as the old ones did. Weekend project.

**JerryHawk250** · 02-21-2018, 08:09 AM

Quote:

Originally Posted by timcosby

like riding a tank

That's a big jump up in weight from the Hawk lol. Looks good!

**cheesy** · 02-21-2018, 02:43 PM

A new starter for a twenty year old Cat 3116 engine. I was able to do in two hours what the customers' bureaucratic purchasing department hasn't been able to do in a month.

Bill1 · 02-21-2018, 09:27 PM

I bought a 4'x6' American flag. My old 3x5 was faded and has started to tear. Also bought a spool hub adapter for my little Miller mig welder. I bought the welder 2nd hand a couple years ago and it had an 8" spool that had been dropped and wobbled. It welds great as long as you feed a couple of feet off of the spool. I always thought it was the broken spool of wire until I switched to a 4" spool and found the nubs were broken off the back of the spool hub. I'm pretty sure that even with the new part, I will still spend more time grinding than welding though.

Darkrider · 02-24-2018, 09:31 PM

2 Datsun 521 Pickups and 2 Datsun 510 wagons for $600 for all 4. The Wagons are drivetrain donors for the trucks as their bodies are shot.

ben2go · 02-24-2018, 10:18 PM

Today I needed to repair my stove. The SO overfills pots and then allows them to boil over and foul up the burner contacts.
About once a year they need to be cleaned really well. So I bought these from HF.

bogieboy · 02-25-2018, 09:10 AM

Found ot my 100a bbattery load tester was not working any more so i got this....

**cheesy** · 02-25-2018, 10:22 AM

Tried wish.com yesterday. Bought a 3tb portable hd and a set of ceramic kitchen knives. We shall see.

bogieboy · 02-25-2018, 10:44 AM

Quote:

Originally Posted by cheesy

Tried wish.com yesterday. Bought a 3tb portable hd and a set of ceramic kitchen knives. We shall see.

I have gotten several items from wish.... kinda hit or miss...like much of the stuff straight outta china...LOL

**cheesy** · 02-25-2018, 03:09 PM

Quote:

Originally Posted by bogieboy

I have gotten several items from wish.... kinda hit or miss...like much of the stuff straight outta china...LOL

Not too concerned one way or the other. If they work, great. If they don’t, lesson learned.

Darkrider · 02-28-2018, 12:24 AM

Traded my '91 GMC Sierra for an '86 GMC Jimmy Sierra Classic

Azhule · 02-28-2018, 11:14 AM

Bought stuff to make a cake today

**JerryHawk250** · 02-28-2018, 11:24 AM

Quote:

Originally Posted by Azhule

Bought stuff to make a cake today

Are you baking your own Birthday cake? Happy Birthday

Azhule · 02-28-2018, 11:27 AM

Quote:

Originally Posted by JerryHawk250

Are you baking your own Birthday cake? Happy Birthday

Yeah, I'll be making and baking my own cake today

Bill1 · 02-28-2018, 05:20 PM

I bought a mesh jacket and the shoulder and elbow pad upgrades from Revzilla.
This one: https://www.revzilla.com/motorcycle/fly-flux-air-jacket

It fits good and doesn't look bad. Hoping to have more protection than a T-shirt gives, now that we're already in summer here in FL.

It showed up today with 3 out of the 6 snaps on the elbows broken and missing. Now we're gonna see if Revzilla's customer service is as good as they claim to be.

02-21-2018, 07:56 AM	#856
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,562	I order new 500w crossovers, 300w tweeters and 200w midrange speakers. My DJ speakers took a beating after 3 Mardi Gras parades, I blew 2 tweeters , one midrange and one of the crossovers fried. This was on my 30+ year old Custom built speakers. 15" are still kicking. First time I had to replace speakers. My newer Dual 15's had no problems. What I get I kick out of is some of these DJ's had 6-10 speakers on some of these floats and sounded like total crap. I got a few looks with only 4 speakers setup and sounded better than there system with only 4 speakers. lol One guy wanted to know were I got the speakers from. When I told him I made them he wanted to know how much I charge to build him some. I hope the new tweeters and mids hold up a good as the old ones did. Weekend project. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

02-21-2018, 02:43 PM	#858
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,803	A new starter for a twenty year old Cat 3116 engine. I was able to do in two hours what the customers' bureaucratic purchasing department hasn't been able to do in a month. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0

02-21-2018, 09:27 PM	#859
Bill1 Join Date: Sep 2016 Location: FL Posts: 95	I bought a 4'x6' American flag. My old 3x5 was faded and has started to tear. Also bought a spool hub adapter for my little Miller mig welder. I bought the welder 2nd hand a couple years ago and it had an 8" spool that had been dropped and wobbled. It welds great as long as you feed a couple of feet off of the spool. I always thought it was the broken spool of wire until I switched to a 4" spool and found the nubs were broken off the back of the spool hub. I'm pretty sure that even with the new part, I will still spend more time grinding than welding though. __________________ 2016 RPS Hawk 250, exhaust, Uni Filter, Mikuni VM-26 clone w/ 120 main & 30 pilot, MSR shifter, 17/45 sprockets, JT chain, digital cluster...
	1

02-25-2018, 10:22 AM	#863
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,803	Tried wish.com yesterday. Bought a 3tb portable hd and a set of ceramic kitchen knives. We shall see. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	1

02-28-2018, 11:14 AM	#867
Azhule Join Date: Dec 2015 Location: CO Posts: 1,525	Bought stuff to make a cake today __________________ "Think as you like... but this self proclaimed Professor is always right" - Buckshot "You never know what someone is hiding beneath their smile..." - NinjaTom - R.I.P.
	0

02-24-2018, 10:18 PM	#861
ben2go Join Date: Jun 2011 Posts: 1,335	Today I needed to repair my stove. The SO overfills pots and then allows them to boil over and foul up the burner contacts. About once a year they need to be cleaned really well. So I bought these from HF.
	0

02-28-2018, 05:20 PM	#870
Bill1 Join Date: Sep 2016 Location: FL Posts: 95	I bought a mesh jacket and the shoulder and elbow pad upgrades from Revzilla. This one: https://www.revzilla.com/motorcycle/fly-flux-air-jacket It fits good and doesn't look bad. Hoping to have more protection than a T-shirt gives, now that we're already in summer here in FL. It showed up today with 3 out of the 6 snaps on the elbows broken and missing. Now we're gonna see if Revzilla's customer service is as good as they claim to be. __________________ 2016 RPS Hawk 250, exhaust, Uni Filter, Mikuni VM-26 clone w/ 120 main & 30 pilot, MSR shifter, 17/45 sprockets, JT chain, digital cluster...
	0