Just bought a new Rhino 250 and am going to install a 60" snow plow - Page 4

PANDEMIC · 01-24-2019, 08:44 AM

Plow is out for delivery today. I will keep everyone posted.

**JerryHawk250** · 01-24-2019, 08:47 AM

Quote:

Originally Posted by PANDEMIC

see how they weld a v bar onto every link of the chain that touches the ground. it grips like crazy but also scratches like crazy. These are great on ice though

I can see that messin up some concrete.

PANDEMIC · 01-24-2019, 05:00 PM

Ok, plow showed up. I did have to cut some of the U-bolts shorter to fit the push tubes in the bracket, nothing to hard. It went on smooth otherwise. Here are some pictures. If you wanted a plow for your atv buy buy buy I doubt you will find a new atv plow kit for under $170.00 shipped to your door.
Attachment 15560

Attachment 15561

Attachment 15562

Attachment 15563

Attachment 15564

**JerryHawk250** · 01-24-2019, 05:04 PM

Nice!

Looks to be well made too. Now for the test run video.

PANDEMIC · 01-24-2019, 05:19 PM

I have pics of the kit and the mounting bracket and it comes with the 5 position carrier, not the 3 position carrier it calls for so that was a plus.
Attachment 15568

Attachment 15569

Attachment 15570

Attachment 15571

PANDEMIC · 01-24-2019, 05:22 PM

snow is coming Sunday. I did clear my driveway apron with it worked great

PANDEMIC · 01-24-2019, 05:24 PM

one huge downside is you will have to remove mounting bracket from atv to do an oil change.
or I might just drill a hole big enough to fit a socket in.

**JerryHawk250** · 01-24-2019, 05:52 PM

Quote:

Originally Posted by PANDEMIC

one huge downside is you will have to remove mounting bracket from atv to do an oil change.
or I might just drill a hole big enough to fit a socket in.

The kit look heavy duty. I would just drill a hole for the oil drain plug.

PANDEMIC · 01-24-2019, 06:03 PM

the plow kit is very heavy duty almost scares me on how thin the ATV frame is in comparison.

Darth Racer · 01-24-2019, 06:58 PM

Thanks for the update Pandemic.

PANDEMIC · 01-24-2019, 09:15 PM

Sure thing.

So on another note, I warmed up the ATV in my garage. Set the idle to 1440-1500 it bounces some. Drove it to my uncles 1 mile away when I arrived the engine stalled as soon as I came to full stop. I started it back up and it was surging from 1140 to 1320. Its cold out 17° F will the wind chill feels like -3° F. I didn't even think about the go pro for the ride next time.

PANDEMIC · 01-24-2019, 09:17 PM

Carb is the Mikuni VM26 it has the stock 40 slow and a 110 main jet with clip in the middle of the needle.

Darth Racer · 01-25-2019, 06:36 PM

Temps that cold I would just be happy it ran.... and started right back up after it stalled.

LOL was probably the fuel hose shrinking. Not sure of the temp range of the Rotella oil or whatever your using. Below zero effects on little carb parts and springs.... dunno.

Got the plow today... last one they had in the store... Tax Free Delaware too... NICE!!! Really cool store to visit... they had an awesome trout aquarium there stocked with every different trout there is.

Darth Racer · 01-25-2019, 06:38 PM

Almost forgot. Looked at my buddies setup today.... he has a full size ATV (brand name) and a 50" plow. Waiting to see what it looks like all mounted up but have a feeling I might cut a couple inches off each side if it sticks out too much.

PANDEMIC · 01-26-2019, 11:34 AM

Quote:

Originally Posted by Darth Racer

Temps that cold I would just be happy it ran.... and started right back up after it stalled.

LOL was probably the fuel hose shrinking. Not sure of the temp range of the Rotella oil or whatever your using. Below zero effects on little carb parts and springs.... dunno.

Got the plow today... last one they had in the store... Tax Free Delaware too... NICE!!! Really cool store to visit... they had an awesome trout aquarium there stocked with every different trout there is.

Nice store but have to watch the prices on stuff I have 2 within an hour and a Basspro shop within an hour and a half of my house.

It was a bargain. "Bargain - Sale to good to pass up!"
Fish feeding is on Saturday at Noon

01-24-2019, 05:00 PM	#48
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	Ok, plow showed up. I did have to cut some of the U-bolts shorter to fit the push tubes in the bracket, nothing to hard. It went on smooth otherwise. Here are some pictures. If you wanted a plow for your atv buy buy buy I doubt you will find a new atv plow kit for under $170.00 shipped to your door. Attachment 15560 Attachment 15561 Attachment 15562 Attachment 15563 Attachment 15564 Last edited by PANDEMIC; 02-01-2019 at 09:34 AM.
	3

01-24-2019, 05:04 PM	#49
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,574	Nice! Looks to be well made too. Now for the test run video. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

01-24-2019, 05:19 PM	#50
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	I have pics of the kit and the mounting bracket and it comes with the 5 position carrier, not the 3 position carrier it calls for so that was a plus. Attachment 15568 Attachment 15569 Attachment 15570 Attachment 15571 Last edited by PANDEMIC; 02-01-2019 at 09:34 AM.
	3

01-24-2019, 08:44 AM	#46
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	Plow is out for delivery today. I will keep everyone posted.
	0

01-24-2019, 05:22 PM	#51
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	snow is coming Sunday. I did clear my driveway apron with it worked great
	3

01-24-2019, 05:24 PM	#52
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	one huge downside is you will have to remove mounting bracket from atv to do an oil change. or I might just drill a hole big enough to fit a socket in.
	2

01-24-2019, 06:03 PM	#54
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	the plow kit is very heavy duty almost scares me on how thin the ATV frame is in comparison.
	0

01-24-2019, 06:58 PM	#55
Darth Racer Join Date: Apr 2016 Location: MD Posts: 558	Thanks for the update Pandemic.
	2

01-24-2019, 09:15 PM	#56
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	Sure thing. So on another note, I warmed up the ATV in my garage. Set the idle to 1440-1500 it bounces some. Drove it to my uncles 1 mile away when I arrived the engine stalled as soon as I came to full stop. I started it back up and it was surging from 1140 to 1320. Its cold out 17° F will the wind chill feels like -3° F. I didn't even think about the go pro for the ride next time.
	0

01-24-2019, 09:17 PM	#57
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	Carb is the Mikuni VM26 it has the stock 40 slow and a 110 main jet with clip in the middle of the needle.
	0

01-25-2019, 06:36 PM	#58
Darth Racer Join Date: Apr 2016 Location: MD Posts: 558	Temps that cold I would just be happy it ran.... and started right back up after it stalled. LOL was probably the fuel hose shrinking. Not sure of the temp range of the Rotella oil or whatever your using. Below zero effects on little carb parts and springs.... dunno. Got the plow today... last one they had in the store... Tax Free Delaware too... NICE!!! Really cool store to visit... they had an awesome trout aquarium there stocked with every different trout there is.
	3

01-25-2019, 06:38 PM	#59
Darth Racer Join Date: Apr 2016 Location: MD Posts: 558	Almost forgot. Looked at my buddies setup today.... he has a full size ATV (brand name) and a 50" plow. Waiting to see what it looks like all mounted up but have a feeling I might cut a couple inches off each side if it sticks out too much.
	0