Father daughter PW50 project - Page 3

Weldangrind · 07-17-2014, 10:32 AM

Looking good! You might be able to clean up those fork lowers with an SOS pad.

Dave_D · 07-20-2014, 11:21 PM

No updates on the bike.

But I bought her a balance bike aka stryder
So she can start to learn her balance on 2 wheels
Has sent grasped the concept yet. Lifts her feet and expects it to go lol

Dave

SpudRider · 07-21-2014, 12:20 PM

Indeed, it is wise for them to learn balance, before they get a motor.

Dave_D · 07-22-2014, 01:47 AM

Got the plastics more or less installed today
Still needs tidying up.

Still needs a few other odds and ends but it's getting there.

I was going to wait till the graphics came to put plastics on. But I got impatient lol

Dave

Weldangrind · 07-22-2014, 02:01 AM

That looks amazing! How was the fit of the new plastics?

Dave_D · 07-22-2014, 02:14 AM

Quote:

Originally Posted by Weldangrind

That looks amazing! How was the fit of the new plastics?

Fit is pretty good overall front fender mounts needed a little modification

Gas tank is still not mounted perfect yet. Sitting a little off right now I have all the pieces to make it right. Just ran out of time

Rear plastic feels like it's about an inch longer at the back. But that's ok

From what I've read the 81 82 83 are slightly different then the 84 to present

I think it came out great and looks a lot newer then a 81
Can't wait for the graphics and see what the finished product will look like

Dave

**cheesy** · 07-22-2014, 08:21 AM

SpudRider · 07-22-2014, 10:00 AM

Quote:

Originally Posted by Dave_D

Got the plastics more or less installed today
Still needs tidying up.

Still needs a few other odds and ends but it's getting there.

I was going to wait till the graphics came to put plastics on. But I got impatient lol

Dave

What a transformation! You did a beautiful job.

Dave_D · 07-29-2014, 11:05 PM

The graphics kit FINALLY made it

The bikes still not completed. Still a lot of loose ends that need cleaned up.

Been working on my new TTR
And the wife's xr80 lately

If there's any interest I'll post a thread on the xr (actually a 1981 xl80s) it's a pile lol

Here's a couple fun shots father daughter bikes (pics same as other thread)

Thanks

Dave

SpudRider · 07-29-2014, 11:48 PM

Those graphics are very nice.

Weldangrind · 07-30-2014, 12:34 AM

That PW looks better than new! When your daughter is done with it, it'll bring cash.

Yes, I'd love to see a thread on the XL. I love the old Hondas.

Dave_D · 08-06-2014, 01:17 AM

Been a while since a hailey update lol
Since we usually go ride with a group I decided to order some goggles for hailey. We mostly keep to ourselves when we ride. But the guilt I'd feel if she got a rock or something in the face.
I decided to try these for the price
http://www.ebay.com/itm/160930126263
If they don't fit her helmet well I'll give them to my wife.

Here's my little girl in her helmet

She's spoiled. Has a nicer helmet then I do lol
Only the best for her

Dave

SpudRider · 08-06-2014, 01:41 AM

That's a nice helmet, good googles, great pose, and a beautiful little girl.

P.S. I love the pink sunglasses.

Weldangrind · 08-06-2014, 02:07 AM

The hand on the hip completes the picture.

**cheesy** · 08-06-2014, 08:20 AM

07-17-2014, 10:32 AM	#31
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Looking good! You might be able to clean up those fork lowers with an SOS pad. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

07-21-2014, 12:20 PM	#33
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Indeed, it is wise for them to learn balance, before they get a motor. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

07-22-2014, 02:01 AM	#35
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	That looks amazing! How was the fit of the new plastics? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

07-22-2014, 08:21 AM	#37
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,804	__________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0

07-29-2014, 11:48 PM	#40
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Those graphics are very nice. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

07-20-2014, 11:21 PM	#32
Dave_D Join Date: May 2014 Location: Vancouver Island BC Posts: 264	No updates on the bike. But I bought her a balance bike aka stryder So she can start to learn her balance on 2 wheels Has sent grasped the concept yet. Lifts her feet and expects it to go lol Dave
	0

07-22-2014, 01:47 AM	#34
Dave_D Join Date: May 2014 Location: Vancouver Island BC Posts: 264	Got the plastics more or less installed today Still needs tidying up. Still needs a few other odds and ends but it's getting there. I was going to wait till the graphics came to put plastics on. But I got impatient lol Dave
	0

07-29-2014, 11:05 PM	#39
Dave_D Join Date: May 2014 Location: Vancouver Island BC Posts: 264	The graphics kit FINALLY made it The bikes still not completed. Still a lot of loose ends that need cleaned up. Been working on my new TTR And the wife's xr80 lately If there's any interest I'll post a thread on the xr (actually a 1981 xl80s) it's a pile lol Here's a couple fun shots father daughter bikes (pics same as other thread) Thanks Dave
	0

07-30-2014, 12:34 AM	#41
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	That PW looks better than new! When your daughter is done with it, it'll bring cash. Yes, I'd love to see a thread on the XL. I love the old Hondas. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-06-2014, 01:17 AM	#42
Dave_D Join Date: May 2014 Location: Vancouver Island BC Posts: 264	Been a while since a hailey update lol Since we usually go ride with a group I decided to order some goggles for hailey. We mostly keep to ourselves when we ride. But the guilt I'd feel if she got a rock or something in the face. I decided to try these for the price http://www.ebay.com/itm/160930126263 If they don't fit her helmet well I'll give them to my wife. Here's my little girl in her helmet She's spoiled. Has a nicer helmet then I do lol Only the best for her Dave
	0

08-06-2014, 01:41 AM	#43
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	That's a nice helmet, good googles, great pose, and a beautiful little girl. P.S. I love the pink sunglasses. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

08-06-2014, 02:07 AM	#44
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	The hand on the hip completes the picture. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-06-2014, 08:20 AM	#45
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,804	__________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0