1990 HONDA XR80R Dang close to being done :) - Page 3

AZ200cc · 06-11-2009, 05:08 PM

SEATS DONE!!!

Not perfect but good enough

Rokcin and rollin on my day off 8)

AZ200cc · 06-12-2009, 12:54 AM

I NEED A NAP.

Ok worked pretty hard at it today, My buddy came over and we hauled the bike to the wash...He stuck around and helped me strip off some parts and other stuff. After he took off I got to spraying. Once I start I have a hard time stopping so I went until about an hour ago and hit the block wall that is......I need parts. So I pulled the bike inside because now people will want to steal it

And here are the pics

I'M fricken starving, TIME FOR SOME MAN FUEL

katoranger · 06-12-2009, 09:02 AM

Looks good. Did you use high temp paint on the engine.

I will send that kill switch. Probably get it out this afternoon. Looks like she could almost ride it.

Also have you check denniskirk for aftermarket plastic?

Allen

AZ200cc · 06-12-2009, 11:39 AM

Quote:

Originally Posted by katoranger

Looks good. Did you use high temp paint on the engine.

I will send that kill switch. Probably get it out this afternoon. Looks like she could almost ride it.

Also have you check denniskirk for aftermarket plastic?

Allen

Yes sir, The engine got a coat of high temp enamal, And the frame got anti rust enamal....Course some of it over lapped while spraying but hey it's not a show bike

The exhaust and black parts are all stove paint. Once the switch arrives I'll pop her on too swift.....Bad new is that the rear rim and hub are shot.....Rims out of true and missing spokes hub has a crack. Never know what You will find when you get em apart ya know.

katoranger · 06-12-2009, 01:48 PM

Best bet is to go to ebay. New will be too expensive.

You may find someone parting a bike that has everything you need.

Allen

AZ200cc · 06-12-2009, 10:30 PM

Cool , I checked out dennis kirk and they have a red fender that everyone else is out of, Now I know where these oddball side panels came from........Same brand. So I can order an OE front fender cheaper but I can get and aftermarket rear.... 8O :roll: I guess I'll order my accelrator sleeve and live witht he perches i have :roll: and get new handles. I wanted to make it look like a 2000 model, but screw it I'll make it look like my model

katoranger · 06-13-2009, 02:05 PM

I think I will have the pegs and brake rod for you. Will send them with the switch.

Allen

SpeedSouth · 06-13-2009, 03:40 PM

Wow! You really knocked that right out!

Nice job!

AZ200cc · 06-13-2009, 08:04 PM

Awesome Kato, That will be a big help....Those were holding me up as You can tell by the pics

Thanks Speedsouth, If it were a vintage bike I would have gone very slow and checked every bolt...But I am just going to trade this for a honda 50 so I am not worried about the fine details....This might be my new career

AZ200cc · 06-13-2009, 11:14 PM

Well It seemed a bit bright on thepaint for me so I took some clear and sprayed over it and it did dull down the silver enough...My buddy has a new lever he gave me and I ordered the throttle tube and some grips for it...And have a bid on a rear wheel and hub assbly on ebay going. With Katos pegs and kill switch and brake rod that only leaves.

Tires, Back seems good enough might just do the front
Front fender,
Rear fender,
Number plate,
decals.
Fork boots.....Heck what a short list now

So lets see, I have spent about 50 bucks in paint and supplies, 45 on the seat six at the car wash, and will prbably spend another 150 on the last parts maybe 200.......So after all that maybe three hundred for a complete bike.......I love knowing how to fix things

I put the old tattered plastics back on so I don't lose anymore screws :oops: I had to ride it

That cat knows exactly how I feel

katoranger · 06-14-2009, 08:48 AM

You got a $600-700 bike now.

Allen

AZ200cc · 06-16-2009, 10:39 PM

No title so it's about 600 tops....But enough to trade for a Honda 50 I think. Hey Kato did You send those parts? You never told me how much $$$

katoranger · 06-16-2009, 10:55 PM

I haven't gotton them yet. Been busy. He is suppose to remove them for me.

Allen

AZ200cc · 06-17-2009, 12:31 AM

Gotcha

AZ200cc · 06-18-2009, 01:31 AM

Well not much to update, Daughter installed the new throttle tube and grips.....Still gotta go pick up the lever. And kinda at a stand still.....I am waiting to order the fenders until next payday after that I am simply going to sand and paint the number plate. it will be good enough as is. Should be done by the middle of july. Because of the size and age of the bike most probably would have just bashed it until death or thrown it away....This proves that even an ugly old turd can look good again.
So theres hope for me

06-11-2009, 05:08 PM	#31
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	SEATS DONE!!! Not perfect but good enough Rokcin and rollin on my day off 8) __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

06-12-2009, 12:54 AM	#32
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	I NEED A NAP. Ok worked pretty hard at it today, My buddy came over and we hauled the bike to the wash...He stuck around and helped me strip off some parts and other stuff. After he took off I got to spraying. Once I start I have a hard time stopping so I went until about an hour ago and hit the block wall that is......I need parts. So I pulled the bike inside because now people will want to steal it And here are the pics I'M fricken starving, TIME FOR SOME MAN FUEL __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

06-12-2009, 09:02 AM	#33
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Looks good. Did you use high temp paint on the engine. I will send that kill switch. Probably get it out this afternoon. Looks like she could almost ride it. Also have you check denniskirk for aftermarket plastic? Allen __________________ You meet the nicest people on a Honda Clone.
	0

06-12-2009, 01:48 PM	#35
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Best bet is to go to ebay. New will be too expensive. You may find someone parting a bike that has everything you need. Allen __________________ You meet the nicest people on a Honda Clone.
	0

06-12-2009, 10:30 PM	#36
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	Cool , I checked out dennis kirk and they have a red fender that everyone else is out of, Now I know where these oddball side panels came from........Same brand. So I can order an OE front fender cheaper but I can get and aftermarket rear.... 8O :roll: I guess I'll order my accelrator sleeve and live witht he perches i have :roll: and get new handles. I wanted to make it look like a 2000 model, but screw it I'll make it look like my model __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

06-13-2009, 02:05 PM	#37
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	I think I will have the pegs and brake rod for you. Will send them with the switch. Allen __________________ You meet the nicest people on a Honda Clone.
	0

06-13-2009, 03:40 PM	#38
SpeedSouth Join Date: Apr 2008 Location: Atlanta, Ga Posts: 710	Wow! You really knocked that right out! Nice job! __________________ 2008 American Lifan LF200 GY-5 (930 km) - Sold 2007 Kawasaki EX250 - Sold 2006 Kawasaki EX650R - My new ride! 2005 Kawasaki EX250 - A new project
	0

06-13-2009, 08:04 PM	#39
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	Awesome Kato, That will be a big help....Those were holding me up as You can tell by the pics Thanks Speedsouth, If it were a vintage bike I would have gone very slow and checked every bolt...But I am just going to trade this for a honda 50 so I am not worried about the fine details....This might be my new career __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

06-13-2009, 11:14 PM	#40
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	Well It seemed a bit bright on thepaint for me so I took some clear and sprayed over it and it did dull down the silver enough...My buddy has a new lever he gave me and I ordered the throttle tube and some grips for it...And have a bid on a rear wheel and hub assbly on ebay going. With Katos pegs and kill switch and brake rod that only leaves. Tires, Back seems good enough might just do the front Front fender, Rear fender, Number plate, decals. Fork boots.....Heck what a short list now So lets see, I have spent about 50 bucks in paint and supplies, 45 on the seat six at the car wash, and will prbably spend another 150 on the last parts maybe 200.......So after all that maybe three hundred for a complete bike.......I love knowing how to fix things I put the old tattered plastics back on so I don't lose anymore screws :oops: I had to ride it That cat knows exactly how I feel __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

06-14-2009, 08:48 AM	#41
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	You got a $600-700 bike now. Allen __________________ You meet the nicest people on a Honda Clone.
	0

06-16-2009, 10:39 PM	#42
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	No title so it's about 600 tops....But enough to trade for a Honda 50 I think. Hey Kato did You send those parts? You never told me how much $$$ __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

06-16-2009, 10:55 PM	#43
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	I haven't gotton them yet. Been busy. He is suppose to remove them for me. Allen __________________ You meet the nicest people on a Honda Clone.
	0

06-17-2009, 12:31 AM	#44
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	Gotcha __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

06-18-2009, 01:31 AM	#45
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	Well not much to update, Daughter installed the new throttle tube and grips.....Still gotta go pick up the lever. And kinda at a stand still.....I am waiting to order the fenders until next payday after that I am simply going to sand and paint the number plate. it will be good enough as is. Should be done by the middle of july. Because of the size and age of the bike most probably would have just bashed it until death or thrown it away....This proves that even an ugly old turd can look good again. So theres hope for me __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0