|
01-10-2023, 07:36 PM | #1 |
Join Date: Nov 2022
Location: Dallas TX
Posts: 583
|
I have a red one, different brand?store? in flight along with some front suspension push button air bleeder valves, so I'll hopefully have those sometime in February to join in on the fun. I hadn't adjusted my carburetor much since the freeze but it was 80 today and 81 tomorrow forecast so the idle screw needed a bit of adjustment to get it dialed in for today's weather. Still not a big deal as I just reach down and tweak it, but I do take my gloves off to do the small set screw. Hoping that I can do the larger knob with gloves on to save some time and gain some hot parts accidental touch protection.
__________________
2022 1/2 Templar X 250 - 6 gear model - 13 Front / 40 Rear Sprockets - #42 / #120 Jets - 1mm thick nitrile O-ring needle shim (removed) - Kenda K761 Dual Sport Tires - Sedona Standard Thickness Inner Tubes - Stock OEM battery, carburetor, spark plug still going strong - https://youtu.be/dhAYEKH-jFQ |
|
01-20-2023, 08:05 AM | #2 |
Join Date: Jan 2023
Posts: 1
|
Templar 250x
Does the MCO say motorcycle on the Xpro Templar X250 or does it say atv. In KY it can't be registered if it says atv or anything related to off road as of 2022 and I'm mainly wanting to order for a commuter bike.
|
|
01-20-2023, 10:37 AM | #3 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,577
|
you should be okay as long as they don't require an inspection before registration. The NHTSA tag will state off-road on it.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
01-20-2023, 08:15 AM | #4 |
Join Date: Oct 2020
Location: Central VA
Posts: 1,259
|
Motorcycle
__________________
2024 Zuma Storm 150 DLX 2019 Beta 430 RRS 2018 VStrom 1000 XT Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X |
|
01-20-2023, 10:18 AM | #5 |
Join Date: Aug 2022
Location: Maben, MS
Posts: 164
|
And from what I’ve heard from others. It’s no problem registering the Templar in Kentucky.
__________________
22 Templar X 250 Hand Guards Custom Graphics Pro Taper Grips 125 main 45 pilot jets 42 tooth rear sprocket 2010 Yamaha Vstar 1100 Silver Star |
|
01-20-2023, 12:09 PM | #6 |
Join Date: Nov 2022
Location: Dallas TX
Posts: 583
|
Just putting it out there. Texas requires an inspection on all new vehicles before registration as well as annually on all renewals. No problems in Texas with Templar X 250.
__________________
2022 1/2 Templar X 250 - 6 gear model - 13 Front / 40 Rear Sprockets - #42 / #120 Jets - 1mm thick nitrile O-ring needle shim (removed) - Kenda K761 Dual Sport Tires - Sedona Standard Thickness Inner Tubes - Stock OEM battery, carburetor, spark plug still going strong - https://youtu.be/dhAYEKH-jFQ |
|
01-25-2023, 03:26 PM | #7 | |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,372
|
Quote:
If you sell one of these to someone in another state, they will probably need ID/OD. Maybe you can get that without the inspector noting the off highway thing. Here, the ID/OD can be done at any inspection station (hundreds in the greater Kansas City area). |
|
|
01-25-2023, 05:05 PM | #8 | |
Join Date: Nov 2022
Location: Dallas TX
Posts: 583
|
Quote:
Texas like other states has its own rules and requirements for on road and off road use. That’s how you see people converting off road dirt bikes to get registered and plated for on street use. If you add everything the states regulators for the states DMV requires to be registered as a road vehicle then you have passed all of that state’s requirements. Under the federated model these agencies don’t have jurisdiction outside of their mission when originally created. Everything listed as required to be on the vehicle for it to be allowed to be registered and plated for Texas is already attached to the Templar X 250 out of the box. And the vehicle went through the states inspection requirement and the inspectors signed off on the vehicle having all the required on street gear attached and that the on street gear was tested and was found to be functioning properly at the time of testing. The annual inspection requirement for vehicles mostly catches vehicles with burned out signal bulbs etc, where the owner must make it work before it is recorded as passing in the states DMV computer registration system. By the time you actually apply in person at a state government agency or online all this is already recorded and logged for your vehicle. It’s also why you do it at the local county tax assessors office here rather than a DMV office as it’s passed all the requirements, now pay the state tax collector his due. The NHTSA is charged with writing and enforcing Federal Motor Vehicle Safety Standards as well as regulations for motor vehicle theft resistance and fuel economy. Safety standards affect the manufacturing process. The EPA mission states it is responsible for creating standards and laws promoting the health of individuals and the environment.
__________________
2022 1/2 Templar X 250 - 6 gear model - 13 Front / 40 Rear Sprockets - #42 / #120 Jets - 1mm thick nitrile O-ring needle shim (removed) - Kenda K761 Dual Sport Tires - Sedona Standard Thickness Inner Tubes - Stock OEM battery, carburetor, spark plug still going strong - https://youtu.be/dhAYEKH-jFQ |
|
|
02-16-2023, 09:42 PM | #9 |
Join Date: Feb 2023
Posts: 8
|
Anyone know where to get a service manual for the X7-CB250F?
|
|
02-20-2024, 09:10 PM | #10 |
Join Date: Feb 2024
Posts: 1
|
Wiring diagrams brake light issue!!
I have a question maybe somebody can help.
We have a 2023 Templer X pro 250 Enduro and the bike did not come with any wiring diagrams or schematics. I’m having a problem with the rear brake light. It will not come on when you apply the brakes but I do have a running light, and when I do switch the leads. The brown and the green in the yellow the brake light will work, but I have no running light. Has anybody had this issue??? Help please!!! |
|
02-20-2024, 10:31 PM | #11 | |
Join Date: May 2023
Location: NY
Posts: 130
|
Quote:
You will find several mentions of the same issue here and a few vids on YouTube. The solder joint has popped loose inside the tailight. You can either open the tailight and repair it or replace it. If you replace it be sure to silicone where the wires go into the light to absorb the vibration and prevent it happening again.
__________________
Templar X Vitacci Clash 200 Beta 300rr GasGas TXT 125 |
|
|
|
|
|
|