No words needed

[BlackBike]

Originally Posted by Aleong1967

Is the a quick way to tell if the fuel water separator is upside down ?

Hope so for you rx3 guys, per Ron b., Apparently no one is checking at azusa. (Didn't get the memo?)


Editing , csc had the orientation correct all along. Just incorrect in a few models in early models which led to confusion. Topics still going on which is best orientation , official or un official orientation .

[SpudRider]

Originally Posted by BlackBike

Hope so for you rx3 guys, per Ron b., Apparently no one is checking at azusa. (Didn't get the memo?)

It's not a big deal; you can flip the OCS in two minutes, without getting your hands dirty.

[BlackBike]

I agree with spud, not a big deal , especially for educated China rider forums members alerted to this issue. Non members, not so much.

[Ron B]

you were right spud, bike came in perfect. Tires handled the curves a whole lot better than i thought.

[Ron B]

Originally Posted by rojo_grande

Congrats on the fastest Orange RX3.

I noticed in the un-crating pics the pallet looks to now have some reinforcement/metal strapping. I don't recall seeing that before in other un-crating pics.

When we un-boxed our RX3 last year, the pallet was cracked/broken through on one side but still together. Others pics, I've seen had the pallet broken into a few pieces.

they crated it well. If you look close a the boards on each side of the tire they even put strips of foam so it wouldnt mar the tires. thats taking the extra step.

[Silversprint]

Originally Posted by SpudRider

Yes, the hose should be on top, and the clamp should be on the bottom of the oil contaminant separator (OCS), as shown below.

Just realized mine was upside down as well.

[Ron B]

went by tractor supply and they don't keep the led lights in stock. So I went by wally world and found a pair on clearance for 9.99. made the mounting hole bigger so I could use the engine guard bolt then wired them to A1. went and mounted the new video camera while I was at it.

[SpudRider]

Let the farkling begin.

[Ron B]

quick test of the camera. lot of wind noise but for $37.00 and waterproof with wifi, i like it.

[RedHawk47]

Originally Posted by Ron B

quick test of the camera. lot of wind noise but for $37.00 and waterproof with wifi, i like it.

May be picking up extra wind/turbulence off of the windscreen. Try feeling with your hand while you are riding to see what the wind is like in different locations.

[3banger]

Having been on the early adopters list I got my bike still packed in the steel crate from China. A lot my more assmebley was reqired that way. Anyway the steel they are using to beef up the shipping creates is left over from the original steel shipping crates; I'm sure they have bunches of scrap just laying around. My shipping crate scrap is destined to be recycled into a welding cart .

Also I've found placing a piece of tape over the microphone on action cams does a resonable job damping down wind noise!

[CSaddict]

My oil separator was also upside down.

[SpudRider]

Originally Posted by Ron B

quick test of the camera. lot of wind noise but for $37.00 and waterproof with wifi, i like it...

I think you camera works pretty well. However, you ran several stop signs, amigo.

[BlackBike]

Man, ron that was fast with the camera and the lights. One quick question, would it be beneficial to mount those lights on the inner side of the bars to avoid smashing the lights if/when it lays over?

Ps, I'm still farkling around with my bike too.

[Ron B]

Originally Posted by BlackBike

Man, ron that was fast with the camera and the lights. One quick question, would it be beneficial to mount those lights on the inner side of the bars to avoid smashing the lights if/when it lays over?

Ps, I'm still farkling around with my bike too.

as cheap as they were ill just buy new ones,lol. spud what stop signs? look close,were none. well...maybe one..at the begining, and they just put that one up not long ago..