vitacci pentora 250cc - Page 2

Jonny · 10-10-2021, 06:50 PM

I'm guessing the copper tube on the side is where the idle screw has been hidden behind a wax/gel. I'm still tuning mine in, upgrading lights and a couple other quick things, and want to idle a fair amount of gas through it before riding; this is where the idle screw comes in.
It's set just a little too low for me to walk away and let nature run it's course.

mobius · 11-26-2021, 07:59 AM

Hey .

I got the death wobble fixed. The tie rod ends were blown out after less than 30 hours. Cheap Chinese parts. I replaced both inner and outer ends, and all four tires with Sun f tires. I am very impressed with the Sun f tires, they are holding up great.
I am hitting 51 mph with throttle left, I am going to "play" with the powerjet, and the air/fuel mix. I was told that I could not hit 55, so I made a wager that I could. He lost the first bet when he doubted I could hit 50, silly rabbit..
Will post again.

DJHavock · 04-01-2024, 05:18 PM

Anybody here upgraded the carb and used the factory box ?

11-26-2021, 07:59 AM	#17
mobius Join Date: Mar 2021 Location: S Texas Posts: 19	death wobble Hey . I got the death wobble fixed. The tie rod ends were blown out after less than 30 hours. Cheap Chinese parts. I replaced both inner and outer ends, and all four tires with Sun f tires. I am very impressed with the Sun f tires, they are holding up great. I am hitting 51 mph with throttle left, I am going to "play" with the powerjet, and the air/fuel mix. I was told that I could not hit 55, so I made a wager that I could. He lost the first bet when he doubted I could hit 50, silly rabbit.. Will post again.
	0

10-10-2021, 06:50 PM	#16
Jonny Join Date: Jun 2012 Posts: 92	I'm guessing the copper tube on the side is where the idle screw has been hidden behind a wax/gel. I'm still tuning mine in, upgrading lights and a couple other quick things, and want to idle a fair amount of gas through it before riding; this is where the idle screw comes in. It's set just a little too low for me to walk away and let nature run it's course.
	0

04-01-2024, 05:18 PM	#18
DJHavock Join Date: Apr 2024 Posts: 1	Anybody here upgraded the carb and used the factory box ?
	0