NEED SOME MAJOR HELP AS SOON AS POSSIBLE - Page 2

lipsee · 08-21-2009, 06:00 AM

Hummer my a,./;'#se its a Bashan 250 (223cc), drain plugs on the left side,theres a inline mesh filter ,becarefull,its allways drops in the old oil.Beware fitting a smaller rear sprocket,the clearance between chain &swingarm is zero ,,,phil

bigboi · 01-08-2013, 10:19 AM

i just bought this same bike its red i got the wiring harness set up took a while but its hooked up right but it still wont start took the carb apart there was a bunch of ish in it cleaned it out but still no luck any thoughts?

Weldangrind · 01-08-2013, 10:33 AM

Welcome!

You say that the wiring harness is correct now; do you have spark?
When you cleaned the carb bowl, did you clean the jets and the jet passages?

08-21-2009, 06:00 AM	#16
lipsee Join Date: Aug 2009 Location: London Posts: 6	Hummer my a,./;'#se its a Bashan 250 (223cc), drain plugs on the left side,theres a inline mesh filter ,becarefull,its allways drops in the old oil.Beware fitting a smaller rear sprocket,the clearance between chain &swingarm is zero ,,,phil __________________ 2007 Bashan250 vixen/1975 HondaGL1000/Rudge 1953 Gents push bike
	0

01-08-2013, 10:33 AM	#18
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Welcome! You say that the wiring harness is correct now; do you have spark? When you cleaned the carb bowl, did you clean the jets and the jet passages? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

01-08-2013, 10:19 AM	#17
bigboi Join Date: Jan 2013 Posts: 1	i just bought this same bike its red i got the wiring harness set up took a while but its hooked up right but it still wont start took the carb apart there was a bunch of ish in it cleaned it out but still no luck any thoughts?
	0