i think ive got it - Page 14

SpudRider · 06-16-2013, 02:07 PM

If you bring the flasher to a local auto parts store, I'm confident they can find a good replacement unit for you.

Corvairkid · 06-16-2013, 03:05 PM

thats where i got it to begin with i need to figure out why i got 16V to the flasher thats way to much

SpudRider · 06-16-2013, 04:02 PM

I don't understand how you can get 16V from a 12V battery.

You shouldn't get that much voltage coming from a good regulator/rectifier (R/R), and the flasher is not even fed from the R/R, it is fed from the battery.

Are you sure your digital multimeter is working properly?

Corvairkid · 06-16-2013, 06:00 PM

i'm never sure its a 4.99 meter from hf lmao
but i did rebuild the harness and BTW i was getting 16V with no battery just the bike running

Weldangrind · 06-16-2013, 10:34 PM

Measure the battery for a baseline. That'll let you know if the meter is out of whack.

Corvairkid · 06-17-2013, 07:56 AM

never thought of that i used a 120V outlet set to 200AC on the meter and i got 122.3 so i'm with in 2.3 v not horrible if you figure that in you get 14.7V right on the money

Weldangrind · 06-17-2013, 10:46 AM

Then I think you have a reg / rec problem. Try a new one.

Corvairkid · 06-17-2013, 01:38 PM

all ready on it

SpudRider · 06-17-2013, 01:42 PM

Corvairkid · 06-17-2013, 03:05 PM

i got taobao down to a science i fell as if i speak Chinese now!
i splurged and got a few other things for work and such also got some misc parts for the bike i dont feel like ducking with found a nice set of blue plastics and a tank for 500 bucks shipped oem original blue and white zs250ga racing paint job

Corvairkid · 06-17-2013, 03:15 PM

http://item.taobao.com/item.htm?id=2...4.12001318.0.0
http://item.taobao.com/item.htm?id=2...4.12001318.0.0
http://item.taobao.com/item.htm?id=1...4.12001318.0.0 <-- had to get one since the oem ones dead and the replacement i got from advanced auto blew up lmao!!!
http://item.taobao.com/item.htm?id=2...4.12001318.0.0 got one left and one right! no more ducking with switches!
i also striped the tape off the harness so it could dry out and re-loomed it in black wire loom with zip tires made it look a lot nicer then the oem tape job......

the guy that gave it to me have some remorse i think he came over the just as i got it running good for the first time after adjusting the valves and carb and dileing it i enriched it up a lottle (a little of a lot) and it wants to pull the front tire off the ground now! still caped at 7.5k rpms tho i want to get a hold of the guy i got the cdis from and see if they can slip me a few track boxes for unlimited rpms! i know this brave little motor has them hidden a way in side i can feel it and some how i know i can get an adjustable cam gear in there! }=) i cant help it i love to hot rod every thing still it spits fire and melts rubber!

SpudRider · 06-18-2013, 01:26 AM

Another member gets Taobao fever!

Corvairkid · 06-18-2013, 07:40 AM

soo... i boiled my test battery......i think your right on the rec reg issues!

Corvairkid · 06-18-2013, 03:09 PM

HAAAHAHAHAHA the guy that gave me the bike made me an offer he said if i add up the cost of the parts and such then add what i thinks fair for labor he would buy it back from me! hahaha

Weldangrind · 06-18-2013, 10:18 PM

Are you gonna accept his offer?

06-16-2013, 02:07 PM	#196
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	If you bring the flasher to a local auto parts store, I'm confident they can find a good replacement unit for you. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

06-16-2013, 04:02 PM	#198
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	I don't understand how you can get 16V from a 12V battery. You shouldn't get that much voltage coming from a good regulator/rectifier (R/R), and the flasher is not even fed from the R/R, it is fed from the battery. Are you sure your digital multimeter is working properly? __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

06-16-2013, 10:34 PM	#200
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Measure the battery for a baseline. That'll let you know if the meter is out of whack. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

06-17-2013, 10:46 AM	#202
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Then I think you have a reg / rec problem. Try a new one. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

06-17-2013, 01:42 PM	#204
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	__________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

06-16-2013, 03:05 PM	#197
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	thats where i got it to begin with i need to figure out why i got 16V to the flasher thats way to much
	0

06-16-2013, 06:00 PM	#199
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	i'm never sure its a 4.99 meter from hf lmao but i did rebuild the harness and BTW i was getting 16V with no battery just the bike running
	0

06-17-2013, 07:56 AM	#201
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	never thought of that i used a 120V outlet set to 200AC on the meter and i got 122.3 so i'm with in 2.3 v not horrible if you figure that in you get 14.7V right on the money
	0

06-17-2013, 01:38 PM	#203
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	all ready on it
	0

06-17-2013, 03:05 PM	#205
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	i got taobao down to a science i fell as if i speak Chinese now! i splurged and got a few other things for work and such also got some misc parts for the bike i dont feel like ducking with found a nice set of blue plastics and a tank for 500 bucks shipped oem original blue and white zs250ga racing paint job
	0

06-17-2013, 03:15 PM	#206
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	http://item.taobao.com/item.htm?id=2...4.12001318.0.0 http://item.taobao.com/item.htm?id=2...4.12001318.0.0 http://item.taobao.com/item.htm?id=1...4.12001318.0.0 <-- had to get one since the oem ones dead and the replacement i got from advanced auto blew up lmao!!! http://item.taobao.com/item.htm?id=2...4.12001318.0.0 got one left and one right! no more ducking with switches! i also striped the tape off the harness so it could dry out and re-loomed it in black wire loom with zip tires made it look a lot nicer then the oem tape job...... the guy that gave it to me have some remorse i think he came over the just as i got it running good for the first time after adjusting the valves and carb and dileing it i enriched it up a lottle (a little of a lot) and it wants to pull the front tire off the ground now! still caped at 7.5k rpms tho i want to get a hold of the guy i got the cdis from and see if they can slip me a few track boxes for unlimited rpms! i know this brave little motor has them hidden a way in side i can feel it and some how i know i can get an adjustable cam gear in there! }=) i cant help it i love to hot rod every thing still it spits fire and melts rubber!
	0

06-18-2013, 01:26 AM	#207
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Another member gets Taobao fever! __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

06-18-2013, 07:40 AM	#208
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	soo... i boiled my test battery......i think your right on the rec reg issues!
	0

06-18-2013, 03:09 PM	#209
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	HAAAHAHAHAHA the guy that gave me the bike made me an offer he said if i add up the cost of the parts and such then add what i thinks fair for labor he would buy it back from me! hahaha
	0

06-18-2013, 10:18 PM	#210
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Are you gonna accept his offer? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0