i think ive got it - Page 13

SpudRider · 06-12-2013, 11:56 PM

Do you have a Teikei carburetor? I have a Teikei MV28 carburetor in my Zong, and it does an excellent job.

Weldangrind · 06-13-2013, 01:33 AM

Quote:

Originally Posted by Corvairkid

its fantastic we came to the conclusion your LY200 parts FIT my zs250!!!! good old chevro... i mean zongshen

That's exactly how I feel about most of the China bikes. The interchangeability is awesome!

What's awesome is Sandy on guitar. I love how she has to wear a diving helmet, yet they can have pyrotechnics.

Conrats on getting it running! I bought a complete Zong wiring harness for peanuts from Taobao; maybe that would help you.

Corvairkid · 06-13-2013, 01:52 PM

Quote:

Originally Posted by SpudRider

Do you have a Teikei carburetor? I have a Teikei MV28 carburetor in my Zong, and it does an excellent job.

YEA MV30P carb not to impressed in the design over all but it seemed to clean up and seal up so it works for the moment

SpudRider · 06-13-2013, 02:04 PM

That's a good carburetor.

Personally, I would not change it.

My Teikei MV28 carburetor has performed flawlessly for almost 57,000 miles. My carb is virtually identical to the Teikei MV28 carburetor installed on all the recent models of the Yamaha TW200 motorcycles, except my carburetor uses a single throttle cable. Your carb is slightly larger than mine.

Corvairkid · 06-13-2013, 03:00 PM

yea but i've all ways been a round slide makuni fan last one i had on a Honda twin star 200 had 4 bikes on it before i got it... but I'll seer how this one does it's pretty weathered being exposed to the elements

Corvairkid · 06-13-2013, 03:12 PM

so i dont think the starts disengaging i have to dog on to that to night

Corvairkid · 06-14-2013, 07:23 AM

ok starter solved and now my lights dont work.....they did work now they dont just blinked out

SpudRider · 06-14-2013, 01:11 PM

Good work on the starter.

I suggest you check the light switch, connections, and wiring.

Corvairkid · 06-14-2013, 08:11 PM

well i still have no lights i think i got a bad ground becuese my tac and dash lights died as well

Corvairkid · 06-14-2013, 08:17 PM

also stepped on the soldering iron barefoot! my big toe has a big line on it....

Corvairkid · 06-14-2013, 09:47 PM

found a short or lose wire in the harness and it makes the lights on the dash blink but still no tail light...... or rear turn signals

Corvairkid · 06-15-2013, 06:43 PM

well i road it..... not far just around the yard but it was moving under its own power!!! then the flasher exploded like a m-80 lmao\

SpudRider · 06-16-2013, 01:30 AM

Quote:

Originally Posted by Corvairkid

also stepped on the soldering iron barefoot! my big toe has a big line on it....

Always wear shoes when soldering.

SpudRider · 06-16-2013, 01:32 AM

Quote:

Originally Posted by Corvairkid

well i road it..... not far just around the yard but it was moving under its own power!!! then the flasher exploded like a m-80 lmao\

Congratulations!

You can probably get a suitable replacement flasher at the local, auto parts store. Do you have a 2-prong, or 3-prong flasher?

Corvairkid · 06-16-2013, 06:54 AM

3 pin but one leg has 16V continues, one leg has 7.5V continues and the 3ed is the ground the flasher i was using WAS a replacement the capacitor shot out after looking in to the matter also i have a + charge running in my ground that makes my turn signals being LED slightly glow i think its part of the flasher short tho

06-12-2013, 11:56 PM	#181
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Do you have a Teikei carburetor? I have a Teikei MV28 carburetor in my Zong, and it does an excellent job. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

06-13-2013, 02:04 PM	#184
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	That's a good carburetor. Personally, I would not change it. My Teikei MV28 carburetor has performed flawlessly for almost 57,000 miles. My carb is virtually identical to the Teikei MV28 carburetor installed on all the recent models of the Yamaha TW200 motorcycles, except my carburetor uses a single throttle cable. Your carb is slightly larger than mine. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

06-14-2013, 01:11 PM	#188
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Good work on the starter. I suggest you check the light switch, connections, and wiring. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

06-13-2013, 03:00 PM	#185
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	yea but i've all ways been a round slide makuni fan last one i had on a Honda twin star 200 had 4 bikes on it before i got it... but I'll seer how this one does it's pretty weathered being exposed to the elements
	0

06-13-2013, 03:12 PM	#186
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	so i dont think the starts disengaging i have to dog on to that to night
	0

06-14-2013, 07:23 AM	#187
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	ok starter solved and now my lights dont work.....they did work now they dont just blinked out
	0

06-14-2013, 08:11 PM	#189
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	well i still have no lights i think i got a bad ground becuese my tac and dash lights died as well
	0

06-14-2013, 08:17 PM	#190
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	also stepped on the soldering iron barefoot! my big toe has a big line on it....
	0

06-14-2013, 09:47 PM	#191
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	found a short or lose wire in the harness and it makes the lights on the dash blink but still no tail light...... or rear turn signals
	0

06-15-2013, 06:43 PM	#192
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	well i road it..... not far just around the yard but it was moving under its own power!!! then the flasher exploded like a m-80 lmao\
	0

06-16-2013, 06:54 AM	#195
Corvairkid Join Date: Apr 2013 Location: Daytona beach Posts: 218	3 pin but one leg has 16V continues, one leg has 7.5V continues and the 3ed is the ground the flasher i was using WAS a replacement the capacitor shot out after looking in to the matter also i have a + charge running in my ground that makes my turn signals being LED slightly glow i think its part of the flasher short tho
	0