Just Ordered a Brozz 250 - Page 13

da4design · 04-02-2017, 03:44 PM

looking really good! still love the orange!

BigWeld · 04-02-2017, 08:00 PM

I bought a set of those too, but without the screen printed name on them (I planned on paining mine). Nice touch! How come you pulled the tank?

goat67 · 04-02-2017, 09:35 PM

Quote:

Originally Posted by BigWeld

I bought a set of those too, but without the screen printed name on them (I planned on paining mine). Nice touch! How come you pulled the tank?

I wanted to remove all the stuff so I could tighten and loctite the bolts. Oh I forgot I installed a inline fuel filter too.

I dissembled pretty much all of it. I am going to get it back together yet.

I want to replace the Brake fluid and change the oil. I might do the forks also.

I am going to replace the chain, I probably am going to remove the rear swing arm to grease it.

I am going to remove the catalytic and see what else needs to be done with the stock exhaust I kinda like the look of the chrome cover on the muffler.

Going to wrap the exhaust with the tape.

dpl096 · 04-02-2017, 11:09 PM

Looking good Goat

hertz9753 · 04-03-2017, 12:44 AM

That bike has risers on the top clamp. Are those stock or are you a T-Rex like me?

BigWeld · 04-03-2017, 05:24 AM

Quote:

Originally Posted by hertz9753

That bike has risers on the top clamp. Are those stock or are you a T-Rex like me?

Those are aftermarket

hertz9753 · 04-03-2017, 05:54 AM

Quote:

Originally Posted by BigWeld

Those are aftermarket

2LZ put those on the TT250 and I needed them because I ride standing up often when I'm off road. I have the Tusk 30mm risers.

goat67 · 04-03-2017, 07:47 AM

Here is a list what I have used for parts and any comments.

Hand Guards
Overall positive. I wish I would have just installed the right away instead of after I situated and tie wrapped all the controls and cables on the handle bars.

Handle Bar Grips
Negative after removing the left grip I tried the new one way to loose I will need adhesive to hold it on not sure if I like this Idea these may go back.

NGK Ridium Spark Plug
Positive had to gap it it was a bit over.

Nibbi Air Filter
Positive it is a tight fit but works.

LED Headlamp
Neutral The connector is long and the mounting would not be secure I used some silicone to secure the mounting bracket to the housing.

Tusk Handlebar Risers 7/8" Bars, 30mm Height

Positive I like the feel of height of the bars when a bit higher up.

Inline fuel filter and new fuel line. Local parts store.
And no I can not give you a year and a model of the bike I want to install it on.
I really need to find a parts store with an old timer that knows parts right off the top of his head.

Yet to do new chain

Unibear® 428H 128 Links

Mirrors

I need to decide what I want to do with the exhaust anybody have a link to a mod to the existing instead of a replace?

I know I can remove the catalytic but what else should I be looking at doing?

The carb is a PZ30 this one is OK to rejet correct?

So that is what is in store.

Kipper1012 · 04-03-2017, 11:04 AM

So the Brozz has a 128 chain not a 130 like the hawk ?

goat67 · 04-03-2017, 11:06 AM

Quote:

Originally Posted by Ariel Red Hunter

Not in my opinion. The rear seems to be quite a stretch, the tire is 40mm bigger. Or an inch and nine-sixteeths bigger, and as for the front, the last thing in a tube that you want is one that is too big. Way to easy to get a pinched tube...ARH

Quote:

Originally Posted by Kipper1012

So the Brozz has a 128 chain not a 130 like the hawk ?

I counted 64 links so that times 2 =128

2LZ · 04-03-2017, 01:02 PM

Hey! Those hand guards look familiar!...wait....so does that trash can mod!...and the risers!....and air filter....wait a minute..... ;-)

VERY nice looking bike! I really like the dash cluster on those a lot.

BlackBike · 04-03-2017, 02:01 PM

Goat, man you are really doing a thorough job! I originally tore mine apart too and electric taped the harness s for protection and electric greased all the terminals.

Kipper1012 · 04-03-2017, 03:38 PM

Quote:

Originally Posted by goat67

I counted 64 links so that times 2 =128

Crap orderd the wrong chain . Guess I'll have to take some links out

Thanks

goat67 · 04-03-2017, 06:37 PM

Quote:

Originally Posted by 2LZ

Hey! Those hand guards look familiar!...wait....so does that trash can mod!...and the risers!....and air filter....wait a minute..... ;-)

VERY nice looking bike! I really like the dash cluster on those a lot.

Yup I followed an expert.... what is that old saying imitation is the best form of flattery. The chain I am getting I also followed your advice and I need to look up what you did for the carb do you happen to have a link I can use.

goat67 · 04-04-2017, 08:31 AM

Can someone explain how to adjust the rear shock on the Brozz / Hawk / TT250?

04-02-2017, 08:00 PM	#182
BigWeld Join Date: Nov 2016 Location: East Pembroke, NY Posts: 301	I bought a set of those too, but without the screen printed name on them (I planned on paining mine). Nice touch! How come you pulled the tank? __________________ Rides a 2016 Bashan 18C with Blue PlastiDip, piped and jetted, USB charger, real-time digital volt meter, faux carbon fiber handguards, 5 COB led headlight upgrade, auxiliary led light bars, and an MSR shift lever with new grips, T6 aluminum handlebars anodized in blue, polished handlebar brace, decals, HD Unibear chain and spoke covers waiting on the always-full mod shelf......
	0

04-02-2017, 11:09 PM	#184
dpl096 Join Date: Sep 2015 Location: East Central Hellinois Posts: 1,344	Looking good Goat __________________ ************************************************ * " Time you enjoy wasting, is not wasted." - John Lennon “I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.” ― Thomas Jefferson "If you don't know where you're going any road will take you there" ....George Harrison song
	0

04-03-2017, 12:44 AM	#185
hertz9753 Join Date: May 2016 Location: Bismarck, ND Posts: 868	That bike has risers on the top clamp. Are those stock or are you a T-Rex like me? __________________ 2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't.
	0

04-03-2017, 11:04 AM	#189
Kipper1012 Join Date: Mar 2017 Location: Florida Posts: 198	So the Brozz has a 128 chain not a 130 like the hawk ? __________________ 2016 Green Bashan Brozz.
	0

04-03-2017, 01:02 PM	#191
2LZ Join Date: Mar 2010 Location: Volcano, Ca Posts: 7,092	Hey! Those hand guards look familiar!...wait....so does that trash can mod!...and the risers!....and air filter....wait a minute..... ;-) VERY nice looking bike! I really like the dash cluster on those a lot. __________________ "Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350
	1

04-02-2017, 03:44 PM	#181
da4design Join Date: Mar 2017 Location: texas Posts: 253	looking really good! still love the orange!
	0

04-03-2017, 07:47 AM	#188
goat67 Join Date: Mar 2017 Location: Twin Cities MN Posts: 525	Here is a list what I have used for parts and any comments. Hand Guards Overall positive. I wish I would have just installed the right away instead of after I situated and tie wrapped all the controls and cables on the handle bars. Handle Bar Grips Negative after removing the left grip I tried the new one way to loose I will need adhesive to hold it on not sure if I like this Idea these may go back. NGK Ridium Spark Plug Positive had to gap it it was a bit over. Nibbi Air Filter Positive it is a tight fit but works. LED Headlamp Neutral The connector is long and the mounting would not be secure I used some silicone to secure the mounting bracket to the housing. Tusk Handlebar Risers 7/8" Bars, 30mm Height Positive I like the feel of height of the bars when a bit higher up. Inline fuel filter and new fuel line. Local parts store. And no I can not give you a year and a model of the bike I want to install it on. I really need to find a parts store with an old timer that knows parts right off the top of his head. Yet to do new chain Unibear® 428H 128 Links Mirrors I need to decide what I want to do with the exhaust anybody have a link to a mod to the existing instead of a replace? I know I can remove the catalytic but what else should I be looking at doing? The carb is a PZ30 this one is OK to rejet correct? So that is what is in store.
	1

04-03-2017, 02:01 PM	#192
BlackBike Join Date: Feb 2016 Location: George West, Texas Posts: 4,097	Goat, man you are really doing a thorough job! I originally tore mine apart too and electric taped the harness s for protection and electric greased all the terminals. __________________ ***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
	0

04-04-2017, 08:31 AM	#195
goat67 Join Date: Mar 2017 Location: Twin Cities MN Posts: 525	Can someone explain how to adjust the rear shock on the Brozz / Hawk / TT250?
	0