Just Ordered a Brozz 250 - Page 12

goat67 · 04-14-2017, 06:59 AM

Quote:

Originally Posted by hertz9753

Fair enough with wanting a bike for the street. I'm also sorry about the hockey helmet mention but hockey is pretty big in North Dakota and it is also big in in Minnesota.

No need to apologize. It is hard to tell the persons intentions without seeing or hearing them.

And The helmet does kinda look like hockey helmet with the shield. BTW really like the helmet I did not want a full face. I also must wear it until I get my motorcycle endorsement I am riding with an instructional permit now.

da4design · 04-13-2017, 07:58 PM

looks great! nice work!

hertz9753 · 04-14-2017, 09:49 PM

It's okay to open it up for a limited time. I have always wondered scooter break in though. Do they just push it and use limited throttle?

MOTOXtreme · 04-14-2017, 11:13 PM

So the air / fuel mixture screw is not behind that metal plug? I was going to remove that tomorrow to access it.

timcosby · 04-15-2017, 02:32 AM

Quote:

Originally Posted by MOTOXtreme

So the air / fuel mixture screw is not behind that metal plug? I was going to remove that tomorrow to access it.

better show us which metal plug your talking about as there may be more than one.

goat67 · 04-15-2017, 08:05 AM

I did not remove any plug the Air Fuel Adjustment is as I said see this pic
http://www.chinariders.net/showpost....86&postcount=9

I do not think there is any other external adjustment besides the idle screw.

goat67 · 04-15-2017, 08:16 AM

Here is a link to a tuning guide for PZ carbs the PZ26 is like the one we have on the Brozz the Brozz uses a PZ30

http://www.ccwthariders.com/uploads/...ing_manual.pdf

Merlin · 04-15-2017, 12:10 AM

Yes it's behind that plug.

BigWeld · 04-15-2017, 08:49 AM

Quote:

Originally Posted by Merlin

Yes it's behind that plug.

Gotta remember Merlin, our bikes have the Keihin carb, not the Mikuni knockoff that comes on the hawk

MOTOXtreme · 04-15-2017, 09:22 AM

Whatever that "viglink" crap is keeps me from seeing anyone's links. I can't be the only one with this issue. It seems to be something on the forum side.

goat67 · 04-15-2017, 09:34 AM

Quote:

Originally Posted by MOTOXtreme

Whatever that "viglink" crap is keeps me from seeing anyone's links. I can't be the only one with this issue. It seems to be something on the forum side.

I know it POs me too.

If you notice the bad links will have http://www.ebay.com

which is not right all you need is www.ebay.com or http://ebay.com

The link for the kit works for me?

MOTOXtreme · 04-15-2017, 09:40 AM

Quote:

Originally Posted by goat67

I know it POs me too.

If you notice the bad links will have http://www.ebay.com

which is not right all you need is www.ebay.com or http://ebay.com

The link for the kit works for me?

Viglink opens it on my end. I was able to find the kit on eBay though. Saved it in my watch list.

BigWeld · 04-15-2017, 10:23 AM

I think it has something to do with iPhone users. The vigilink crap only happens when I use Safari. If I browse these forums using Chrome, everything works perfectly

MOTOXtreme · 04-15-2017, 10:56 AM

Yup, Was on my ipad. My pc (chrome) opens the link fine. Thanks

BigWeld · 04-15-2017, 11:33 AM

Speaking of iOS troubles, do any of you get the annoying pop ups on here? "You're a winner!!!" Then you have to go back and click on the thread again......annoying as hell.

04-14-2017, 09:49 PM	#3
hertz9753 Join Date: May 2016 Location: Bismarck, ND Posts: 868	It's okay to open it up for a limited time. I have always wondered scooter break in though. Do they just push it and use limited throttle? __________________ 2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't.
	0

04-14-2017, 11:13 PM	#4
MOTOXtreme Join Date: Apr 2007 Location: Waynesboro, Virginia Posts: 336	So the air / fuel mixture screw is not behind that metal plug? I was going to remove that tomorrow to access it. __________________ Brian Previously owned / operated MOTO Xtreme selling American Lifan / Check out my friends at www.armattanquads.com "Imagination is more important that knowledge" Albert Einstein
	0

04-15-2017, 08:05 AM	#6
goat67 Join Date: Mar 2017 Location: Twin Cities MN Posts: 525	I did not remove any plug the Air Fuel Adjustment is as I said see this pic http://www.chinariders.net/showpost....86&postcount=9 I do not think there is any other external adjustment besides the idle screw. __________________ 2016 Brozz
	1

04-15-2017, 08:16 AM	#7
goat67 Join Date: Mar 2017 Location: Twin Cities MN Posts: 525	Here is a link to a tuning guide for PZ carbs the PZ26 is like the one we have on the Brozz the Brozz uses a PZ30 http://www.ccwthariders.com/uploads/...ing_manual.pdf __________________ 2016 Brozz
	0

04-15-2017, 12:10 AM	#8
Merlin Join Date: Jun 2016 Location: Colorado Posts: 1,107	Yes it's behind that plug. __________________ Bashan Blaze Mods: Alloy Rim's, Muffler, Mukuni VM26 Carb, Foam Filter, Tachometer, Volt Meter,LED Headlight, LED Blinkers
	0

04-13-2017, 07:58 PM	#2
da4design Join Date: Mar 2017 Location: texas Posts: 253	looks great! nice work!
	0

04-15-2017, 09:22 AM	#10
MOTOXtreme Join Date: Apr 2007 Location: Waynesboro, Virginia Posts: 336	Whatever that "viglink" crap is keeps me from seeing anyone's links. I can't be the only one with this issue. It seems to be something on the forum side. __________________ Brian Previously owned / operated MOTO Xtreme selling American Lifan / Check out my friends at www.armattanquads.com "Imagination is more important that knowledge" Albert Einstein
	1

04-15-2017, 10:23 AM	#13
BigWeld Join Date: Nov 2016 Location: East Pembroke, NY Posts: 301	I think it has something to do with iPhone users. The vigilink crap only happens when I use Safari. If I browse these forums using Chrome, everything works perfectly __________________ Rides a 2016 Bashan 18C with Blue PlastiDip, piped and jetted, USB charger, real-time digital volt meter, faux carbon fiber handguards, 5 COB led headlight upgrade, auxiliary led light bars, and an MSR shift lever with new grips, T6 aluminum handlebars anodized in blue, polished handlebar brace, decals, HD Unibear chain and spoke covers waiting on the always-full mod shelf......
	0

04-15-2017, 10:56 AM	#14
MOTOXtreme Join Date: Apr 2007 Location: Waynesboro, Virginia Posts: 336	Yup, Was on my ipad. My pc (chrome) opens the link fine. Thanks __________________ Brian Previously owned / operated MOTO Xtreme selling American Lifan / Check out my friends at www.armattanquads.com "Imagination is more important that knowledge" Albert Einstein
	1

04-15-2017, 11:33 AM	#15
BigWeld Join Date: Nov 2016 Location: East Pembroke, NY Posts: 301	Speaking of iOS troubles, do any of you get the annoying pop ups on here? "You're a winner!!!" Then you have to go back and click on the thread again......annoying as hell. __________________ Rides a 2016 Bashan 18C with Blue PlastiDip, piped and jetted, USB charger, real-time digital volt meter, faux carbon fiber handguards, 5 COB led headlight upgrade, auxiliary led light bars, and an MSR shift lever with new grips, T6 aluminum handlebars anodized in blue, polished handlebar brace, decals, HD Unibear chain and spoke covers waiting on the always-full mod shelf......
	0