1985 Honda elite 150 build thread. - Page 11

katoranger · 03-26-2011, 10:15 AM

I am waiting on the valve stems, but I checked for clearance before I bought the tire.

Reveeen · 03-26-2011, 10:24 AM

I have a 120/90/10 I hope to use in a similar situation (on my Aero).

katoranger · 03-26-2011, 10:27 AM

Okay. I don't know if that will clear.

humanbeing · 03-27-2011, 04:45 AM

Quote:

Originally Posted by Reveeen

... I'm *thinking* they should be about 8 grams)...

Kymco & SYM are using similar "clone"

katoranger · 03-27-2011, 08:36 AM

Quote:

Originally Posted by humanbeing

Quote:

Originally Posted by Reveeen

... I'm *thinking* they should be about 8 grams)...

Kymco & SYM are using similar "clone"

My research was suggesting 12 grams stock. I wonder what size belt the sh150 uses?

Reveeen · 03-27-2011, 09:13 AM

906-22.5-30

http://www.scooterpartsplace.com/906...da-sh-150.aspx

(the SH150 uses a larger than "normal" rear wheel, so the transmission case has to be longer than "normal")

katoranger · 03-27-2011, 11:03 AM

Too big. Longer case than the elite. Need to look up the new nx110 elite. Probably larger too.

humanbeing · 03-28-2011, 02:29 AM

Alternative parts no. that is 20x15
Honda (Japan)
22123-KV8-315
Honda (China)
22123-KCW-307 / 22123-KVJ-840 /
Kymco
22121-KAAA-900 (15.4g)

/ 22121-KF01-9000 (13.4g)
SYM
22123-KV7-000

katoranger · 03-28-2011, 08:11 AM

Okay, both SYM and Kymco parts are available in the US.

katoranger · 03-28-2011, 06:35 PM

Got the valve stems. Have to say that scrappdog is very speedy. Will be doing more business there.

katoranger · 03-29-2011, 05:47 PM

The rest of the parts arrived today.

OEM Honda rollers. Total of 70-75 grams. 11.5-12.5 each. My scale only reads in 5 gram increments.

katoranger · 03-29-2011, 08:18 PM

Tire is mounted on the rim with a new valve stem. TUBELESS baby. 8) Thanks Reveen for the tip.

So the bugger was getting the beads to seat, but I got it done. My compressor is really too small.

It got dark on me so I will have to get a picture tomorrow of the new tire on the scooter. I don't think I will have any clearance problems.

katoranger · 03-30-2011, 06:27 PM

No clearance problems. At least a 1/4" all around. I could go about an inch more in diameter I think.

Toby is my new helper. He will be hanging out with me a few days a week. We "worked" on the scooter and the lifan powered sears.

Exhaust quickly painted. Got a 10 ft job on it.

Maybe tomorrow we can finish the variator and belt install.

Weldangrind · 03-30-2011, 07:26 PM

That'll be a 10/60 paintjob, because you'll soon be doing 60mph.

That new tire looks really good. Toby looks like a good supervisor.

katoranger · 03-31-2011, 07:34 AM

Somebody has to do it. He's coming back today. Maybe we will be able to ride it. It has been raining all week.

03-26-2011, 10:15 AM	#151
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	I am waiting on the valve stems, but I checked for clearance before I bought the tire. __________________ You meet the nicest people on a Honda Clone.
	0

03-26-2011, 10:27 AM	#153
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Okay. I don't know if that will clear. __________________ You meet the nicest people on a Honda Clone.
	0

03-27-2011, 11:03 AM	#157
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Too big. Longer case than the elite. Need to look up the new nx110 elite. Probably larger too. __________________ You meet the nicest people on a Honda Clone.
	0

03-28-2011, 08:11 AM	#159
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Okay, both SYM and Kymco parts are available in the US. __________________ You meet the nicest people on a Honda Clone.
	0

03-28-2011, 06:35 PM	#160
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Got the valve stems. Have to say that scrappdog is very speedy. Will be doing more business there. __________________ You meet the nicest people on a Honda Clone.
	0

03-26-2011, 10:24 AM	#152
Reveeen Join Date: Jun 2009 Location: orbital platform Posts: 741	I have a 120/90/10 I hope to use in a similar situation (on my Aero).
	0

03-27-2011, 09:13 AM	#156
Reveeen Join Date: Jun 2009 Location: orbital platform Posts: 741	906-22.5-30 http://www.scooterpartsplace.com/906...da-sh-150.aspx (the SH150 uses a larger than "normal" rear wheel, so the transmission case has to be longer than "normal")
	0

03-28-2011, 02:29 AM	#158
humanbeing Join Date: Mar 2008 Posts: 2,436	Alternative parts no. that is 20x15 Honda (Japan) 22123-KV8-315 Honda (China) 22123-KCW-307 / 22123-KVJ-840 / Kymco 22121-KAAA-900 (15.4g) / 22121-KF01-9000 (13.4g) SYM 22123-KV7-000
	0

03-29-2011, 05:47 PM	#161
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	The rest of the parts arrived today. OEM Honda rollers. Total of 70-75 grams. 11.5-12.5 each. My scale only reads in 5 gram increments. __________________ You meet the nicest people on a Honda Clone.
	0

03-29-2011, 08:18 PM	#162
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Tire is mounted on the rim with a new valve stem. TUBELESS baby. 8) Thanks Reveen for the tip. So the bugger was getting the beads to seat, but I got it done. My compressor is really too small. It got dark on me so I will have to get a picture tomorrow of the new tire on the scooter. I don't think I will have any clearance problems. __________________ You meet the nicest people on a Honda Clone.
	0

03-30-2011, 06:27 PM	#163
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	No clearance problems. At least a 1/4" all around. I could go about an inch more in diameter I think. Toby is my new helper. He will be hanging out with me a few days a week. We "worked" on the scooter and the lifan powered sears. Exhaust quickly painted. Got a 10 ft job on it. Maybe tomorrow we can finish the variator and belt install. __________________ You meet the nicest people on a Honda Clone.
	0

03-30-2011, 07:26 PM	#164
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	That'll be a 10/60 paintjob, because you'll soon be doing 60mph. That new tire looks really good. Toby looks like a good supervisor. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

03-31-2011, 07:34 AM	#165
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Somebody has to do it. He's coming back today. Maybe we will be able to ride it. It has been raining all week. __________________ You meet the nicest people on a Honda Clone.
	0