Flywing 100cc parts-Piston rings needed

zking · 12-10-2009, 08:46 PM

I just bought one of these bikes and it needs a set of rings. anyone have a manual or a link or a phone number to get parts? any help is greatly appreciated?
I've posted info in some other places about parts for this bike on ebay, No rings but lots of used parts available for the 100cc and the 150cc

Weldangrind · 12-11-2009, 01:53 AM

Is it a typical clone of a horizontal Honda?

Reveeen · 12-11-2009, 04:19 AM

http://s179.photobucket.com/albums/w...sort=ascending

It appears so...........

The trouble with these things is: they are available in sizes ranging from 50cc to 170cc, to get 100cc there are a few bore and stroke combinations, so you have to measure it up to find out exactly what you need.

katoranger · 12-11-2009, 08:38 AM

It looks just like my baja 90. Same plastics/frame.

Typical honda horizontal clone. The baja is made by hensim. That may help in your search.

Also I ordered parts from www.dratv.com before. They may be able to help. They specialize in the honda horizontal engines/clones.

If you can't find the rings I would recommend just doing a big bore kit. You likely can find a 107/110 kit for cheap.

Allen

12-10-2009, 08:46 PM	#1
zking Join Date: Dec 2009 Posts: 4	Flywing 100cc parts-Piston rings needed I just bought one of these bikes and it needs a set of rings. anyone have a manual or a link or a phone number to get parts? any help is greatly appreciated? I've posted info in some other places about parts for this bike on ebay, No rings but lots of used parts available for the 100cc and the 150cc
	0

12-11-2009, 01:53 AM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Is it a typical clone of a horizontal Honda? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

12-11-2009, 08:38 AM	#4
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	It looks just like my baja 90. Same plastics/frame. Typical honda horizontal clone. The baja is made by hensim. That may help in your search. Also I ordered parts from www.dratv.com before. They may be able to help. They specialize in the honda horizontal engines/clones. If you can't find the rings I would recommend just doing a big bore kit. You likely can find a 107/110 kit for cheap. Allen __________________ You meet the nicest people on a Honda Clone.
	0

12-11-2009, 04:19 AM	#3
Reveeen Join Date: Jun 2009 Location: orbital platform Posts: 741	http://s179.photobucket.com/albums/w...sort=ascending It appears so........... The trouble with these things is: they are available in sizes ranging from 50cc to 170cc, to get 100cc there are a few bore and stroke combinations, so you have to measure it up to find out exactly what you need.
	0