Custom China Riders Bar Pads? Interested?

Jim · 09-23-2008, 07:07 PM

Just gauging the interest in some ChinaRiders.net bar pads, is this something you would be interested in? What would you be willing to pay? Selling these could help support the site, and also replace the unpopular auspicious bar pads...

ChiGongJitsu · 09-24-2008, 03:00 AM

would have to be under 20 bucks as i can pick up the cheap handlebars with a pad for 20 bucks at my local bike shop

tigertamer · 09-24-2008, 07:43 AM

I have a decent looking Zeta, but I would buy one for the cause...especially if it is less than $20 US

Thanks,
Tigertamer

DDG1976 · 09-24-2008, 12:04 PM

I'd buy one since all I have is just the foam and it's held on by a wristwatch, which is actually pretty handy.

VinceDrake · 09-24-2008, 09:54 PM

Hmm. How about an official ChinaRiders.net bar pad, with no velcro, only a wristwatch, held on with blue loc-tite? I'd go $40 for that...

Seriously though, I'd go $20, happily.

--Vince

phil · 09-24-2008, 10:43 PM

what about t shirts i can help if intrested

DDG1976 · 09-25-2008, 04:40 AM

If you do decide to sell them, make sure they can loosen by themselves after 330km and fly off so we have to go back and get it and loctite it on. Otherwise I would have no use for it on my China bike. LOL.

liverchip · 09-26-2008, 12:44 AM

I want one!

09-23-2008, 07:07 PM	#1
Jim Join Date: Mar 2007 Location: Abbotsford, BC, Canada Posts: 4,880	Custom China Riders Bar Pads? Interested? Just gauging the interest in some ChinaRiders.net bar pads, is this something you would be interested in? What would you be willing to pay? Selling these could help support the site, and also replace the unpopular auspicious bar pads... __________________ "Be excellent to each other" "We are all human. Let's start to prove it!"
	0

09-24-2008, 07:43 AM	#3
tigertamer Join Date: Jul 2008 Location: Wheeling, West Virginia Posts: 683	I have a decent looking Zeta, but I would buy one for the cause...especially if it is less than $20 US Thanks, Tigertamer __________________ 07 H-D XL883C 06 LF 200GY-5 Yin and Yang CAUTION Obey The Traffic Regulation. Always Wear a Helmet. Don't Ride After Drinking Wine. Before Operation, Read The Owners Manual Carefully.
	0

09-24-2008, 12:04 PM	#4
DDG1976 Join Date: Aug 2008 Location: Ringgold, Ga. Posts: 410	I'd buy one since all I have is just the foam and it's held on by a wristwatch, which is actually pretty handy. __________________ I have all of soberday to satur up!!
	0

09-24-2008, 09:54 PM	#5
VinceDrake Join Date: Nov 2007 Location: Southern Saskatchewan Posts: 491	Hmm. How about an official ChinaRiders.net bar pad, with no velcro, only a wristwatch, held on with blue loc-tite? I'd go $40 for that... Seriously though, I'd go $20, happily. --Vince __________________ "Sometimes it is better to say nothing, and let people think you're an idiot, than to open your mouth and prove it."
	0

09-24-2008, 10:43 PM	#6
phil Join Date: Jun 2008 Location: wise va Posts: 636	what about t shirts i can help if intrested __________________ halls auto l coolster, modcycles, yanmar & zongshen, dealer fired roketa,lifan and jet moto and apollo quit me who's next
	0

09-24-2008, 03:00 AM	#2
ChiGongJitsu Join Date: Sep 2007 Location: Ohio Posts: 315	would have to be under 20 bucks as i can pick up the cheap handlebars with a pad for 20 bucks at my local bike shop
	0

09-25-2008, 04:40 AM	#7
DDG1976 Join Date: Aug 2008 Location: Ringgold, Ga. Posts: 410	If you do decide to sell them, make sure they can loosen by themselves after 330km and fly off so we have to go back and get it and loctite it on. Otherwise I would have no use for it on my China bike. LOL. __________________ I have all of soberday to satur up!!
	0

09-26-2008, 12:44 AM	#8
liverchip Join Date: Nov 2006 Location: Mystery Spot Posts: 1,223	I want one! __________________ 2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter
	0