03-26-2024, 09:18 PM | #1 |
Join Date: Mar 2024
Posts: 4
|
Hawk 250 rps
Hey everyone, I just put my new bike together and took it for a quick ride. I found the neutral light bulb burnt out from factory. No biggie I'll grab a bulb tomorrow. My main issue is that the gear indicator shows 4 in 3 rd and in 4th gear. Any help would be greatly appreciated! Thanks in advance.
|
|
03-26-2024, 09:28 PM | #2 | |
Join Date: Feb 2021
Posts: 1,003
|
Quote:
|
|
|
03-27-2024, 08:43 AM | #3 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,713
|
Here's the pin out on the cluster.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
03-27-2024, 10:17 AM | #4 | |
Join Date: Mar 2024
Posts: 4
|
Quote:
|
|
|
03-27-2024, 10:38 AM | #5 |
Join Date: Mar 2024
Posts: 4
|
Is there a way to test power or signal from the sensor to check every gear?
|
|
04-05-2024, 12:57 PM | #6 |
Join Date: Mar 2024
Posts: 4
|
Update: all the wire colors are pinned the same. I switched gear indicator switch and still doing the same thing so that's eliminated. I tested both switches with test light and both will not show 3rd gear. So must be the lcd screen in the cluster or the cluster itself or whatever chip or whatever runs that.
|
|
|
|
|
|