Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 11-10-2023, 04:13 PM   #16
jsonnentag   jsonnentag is offline
 
Join Date: Oct 2023
Posts: 11
Oh, and I never even rode it hard and still considered it to be in the break in period. I think the fastest I ever went was maybe 60 at one time and my back and forth to work were stuck at 55. I never even tested out how fast it could really go. . . .


 
Reply With Quote
Old 11-16-2023, 04:13 PM   #17
jsonnentag   jsonnentag is offline
 
Join Date: Oct 2023
Posts: 11
Just for informational purposes, below are 3 links to videos of it running with the ball bearing and various pieces floating around in there that I sent to Lifan while asking things and before I drained the oil and found out about the floating pieces.





 
Reply With Quote
Old 11-16-2023, 06:15 PM   #18
JFOlivier   JFOlivier is offline
 
JFOlivier's Avatar
 
Join Date: Nov 2020
Location: Northern Neck of Virginia.
Posts: 165
If you still are under the warranty period I would expect Lifan to replace the engine, that is definitely not a normal engine noise and suspect it has to do with a failed ball bearing.


 
Reply With Quote
Old 11-17-2023, 02:01 PM   #19
jsonnentag   jsonnentag is offline
 
Join Date: Oct 2023
Posts: 11
$450 - 1 year/6,000 miles for a new engine

Quote:
Originally Posted by JFOlivier View Post
that is definitely not a normal engine noise and suspect it has to do with a failed ball bearing.

Well, I guess it doesn't take too much to figure out it was a ball bearing. There is a picture of it and various other pieces that came out of the oil strainer in Post #15.

It is about 1 year past the 2 year warranty, but it could be 50 years old and ball bearings shouldn't be falling out in under 2,700 miles. )
Anyway, Lifan first said they can't sell an engine directly and you have to go through a "dealer". Kronik Racing came back with $679 and Turbo Powersports came back with $700 + $200 shipping (although they said I could drive over to their place in Norco, CA and pick the engine up there and not have to pay shipping). Then . . . I asked Lifan if they could manage any kind of a discount (since a ball bearing falling out is obviously not a standard maintenance issue - you could NEVER change the oil and ball bearings wouldn't be falling out in under 2,700 miles if it was any good to begin with!) and they said they could organize a payment of $450 through a "dealer" and then I could drive over to Rancho Cucamonga, CA and just pick up the engine from them.
But then I was looking at past China Riders posts about where X-PECT parts can be found and people have links to https://kpclubusa.com/. So I looked up the location of that place and it is in the same building in Rancho Cucamonga as Lifan! So why didn't/doesn't Lifan arrange an engine sale through KPClubUSA.com? I just don't understand their whole philosophy and operation. They make it hard to find Owner's Manuals (I posted the PDF I finally got out of them so people can search and find it - but that is a poor specimen of a manual!) and claim to not even have ANY Service Manuals - the closest being something covering the EFI system only. Besides that, why don't they even have a link to KPClubUSA.com on the Lifan website, at the very LEAST in the list of claimed "dealers"? (If engines can be sold on eBay I guess KPClubUSA.com could be selling them just as well. The ones I have looked at on eBay are actually listed as shipping from Ontario, CA, which is right beside Rancho Cucamonga where Lifan is.) Actually, now that I click on things, you CAN BUY a WHOLE MOTORCYCLE off KPClubUSA.com, so why aren't engines listed along with all the other parts?

Most people must not have ball bearings falling out of their engines, so things in general must be relatively OK (most of the time). So I'll probably pay $450 for an engine IF I can get a clear delineation of how the 1 year/6,000 mile warranty works and what would have to be done to satisfy it. Previous e-mails have said it has to be inspected and you have to have "maintenance records". I told them I would be installing it and I am the only one doing any work on it. If they can manage to put something in writing that the warranty will be in effect under those conditions (a modified version of this warranty posted - https://kpclubusa.com/pages/warranty - modified to apply to sale of only the engine itself) I'll probably give them another chance. But if not, people can expect to see an X-PECT with a thrashed engine (with detailed descriptions of everything I have found out about it and Lifan and their ability to sell engines) for sale on CraigsList and I will move on to other things.


(Oh, the final response from Lifan when I sent those videos of it running was that they supposed it might be a couple GEARS they marked on a parts list. . . . I was not impressed in a positive way.)


 
Reply With Quote
Old 11-17-2023, 08:03 PM   #20
JFOlivier   JFOlivier is offline
 
JFOlivier's Avatar
 
Join Date: Nov 2020
Location: Northern Neck of Virginia.
Posts: 165
Dont know where the ball came from but your problem does not sound as if it is from the reciprocating part of the engine, sounds more like a dragging revolving sound so it could be from the cam shaft or even parts of the gear system. The only way you will know is to strip it down.photograph step by step to make it easier to re assemble. Anyhow it does not give one much confidence in the lifans products or the company as far as I am concerned.


 
Reply With Quote
Reply

Tags
knock, lifan xpect, ping



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:50 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.