10-13-2021, 12:55 PM
|
#11 |
|
Join Date: Oct 2020
Location: Central VA
Posts: 1,259
|
Worked on the carb today as i could see from the plug she was lean on idle and hard to start. A couple of discoveries:
- the stock PZ30 has a metal cap over the idle screw, you can twist it off with plier to reveal the idle screw (so stupid imo). - there is no idle air/fuel mixture screw - pilot is a 37 / main is a 102 Since I had my old stock PZ30 from the Brozz, i decided to use it instead. I used 2 shim washers under the needle, kept the 37 pilot (Brozz was a 34) and changed the main to a 110. Turned the a/f out 2.5 turns. Started right up and a short ride reveals it to be much snappier and no deceleration popping!
__________________
2024 Zuma Storm 150 DLX 2019 Beta 430 RRS 2018 VStrom 1000 XT Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X Last edited by tknj99; 10-13-2021 at 02:14 PM. |
|
|
|
|
|
|
Threaded Mode