Hawk TT250 Exhaust $99.99 - Page 3

Musictrek · 11-12-2017, 01:51 AM

Quote:

Originally Posted by Musictrek

Well I cant leave well enough alone. I modified the bracket and pipe and frame of the bike. All in to keep the clearance of the air box and to position the pipe near the original geometry of the OEM pipe. Cutting the stainless steel pipe was a risky move. It all worked out though. There's no going back now!

old pipe position and now new pipe position.

Musictrek · 11-12-2017, 01:58 AM

Quote:

Originally Posted by Musictrek

Well I cant leave well enough alone. I modified the bracket and pipe and frame of the bike. All in to keep the clearance of the air box and to position the pipe near the original geometry of the OEM pipe. Cutting the stainless steel pipe was a risky move. It all worked out though. There's no going back now!

To get clearance for the pipe, I had to remove the old bolt position of the OEM pipe mount.

Musictrek · 11-12-2017, 02:12 AM

Quote:

Originally Posted by Musictrek

old pipe position and now new pipe position.

old pipe

**JerryHawk250** · 11-12-2017, 08:14 AM

Nice job. I would done ther same. I'm OCD lol. Looks much better.

BlackBike · 11-12-2017, 10:52 AM

cant leave well enough alone. looks even better!!!

is that the xl size burrito tube or the regular (i believe there are 2 sizes). it looks like factory.

you're having too much fun

Musictrek · 11-12-2017, 11:08 AM

Quote:

Originally Posted by BlackBike

cant leave well enough alone. looks even better!!!

is that the xl size burrito tube or the regular (i believe there are 2 sizes). it looks like factory.

you're having too much fun

Thank you! I'm not sure on the burrito. I followed someone on here who installed one and I ordered it a couple years ago I think.

Musictrek · 11-12-2017, 10:34 PM

Quote:

Originally Posted by JerryHawk250

Nice job. I would done ther same. I'm OCD lol. Looks much better.

Thank you! I think ill leave it alone for a week without any mods.

worked on it again today with the exhaust painting the brackets.

roundhouse · 11-24-2017, 07:41 PM

I got mine tuesday installed on my hawk today. Other than drilling the holes through the flange bigger it was easy. I only had a 3/8s drill bit and had to use the dremel to grind out the holes a bit. Everything else went on without a hitch. went with a 120 main jet and it feels a bit faster and sounds GREAT!!!!!!!!!!!!

**JerryHawk250** · 12-16-2019, 09:44 AM

Got a notification from Ebay this morning. $68.58. That's almost to good to pass up. https://www.ebay.com/itm/44cm-Alumin...YAAOSw~3paca4n

buzz · 09-08-2021, 11:24 PM

Hello Amazon has them for $65.00,and it fit perfect

Musictrek · 09-11-2021, 02:07 AM

Quote:

Originally Posted by buzz

Hello Amazon has them for $65.00,and it fit perfect

thats a dam good price! I've since redone my blue Brozz 250 with the same pipe
https://radpaul.weebly.com/brozz-and-hawk-250.htmlhttps://radpaul.weebly.com/brozz-and-hawk-250.html

buzz · 10-08-2021, 07:10 PM

ebay $60.80 for 8 more hours,check it out. Its what i got for $65.00 , works great. perfect fix

11-12-2017, 08:14 AM	#34
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,721	Nice job. I would done ther same. I'm OCD lol. Looks much better. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

11-12-2017, 10:52 AM	#35
BlackBike Join Date: Feb 2016 Location: George West, Texas Posts: 4,097	cant leave well enough alone. looks even better!!! is that the xl size burrito tube or the regular (i believe there are 2 sizes). it looks like factory. you're having too much fun __________________ ***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
	0

12-16-2019, 09:44 AM	#39
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,721	Got a notification from Ebay this morning. $68.58. That's almost to good to pass up. https://www.ebay.com/itm/44cm-Alumin...YAAOSw~3paca4n __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	3

11-24-2017, 07:41 PM	#38
roundhouse Join Date: Sep 2017 Location: N Texas Posts: 706	I got mine tuesday installed on my hawk today. Other than drilling the holes through the flange bigger it was easy. I only had a 3/8s drill bit and had to use the dremel to grind out the holes a bit. Everything else went on without a hitch. went with a 120 main jet and it feels a bit faster and sounds GREAT!!!!!!!!!!!!
	1

09-08-2021, 11:24 PM	#40
buzz Join Date: Dec 2020 Location: Dayton Pa. Posts: 953	Hello Amazon has them for $65.00,and it fit perfect
	1

10-08-2021, 07:10 PM	#42
buzz Join Date: Dec 2020 Location: Dayton Pa. Posts: 953	ebay $60.80 for 8 more hours,check it out. Its what i got for $65.00 , works great. perfect fix
	0