08-23-2021, 06:55 PM
|
#16 |
|
Join Date: Jul 2021
Location: Southern Illinois.
Posts: 33
|
So after speaking with 12oclock labs - I apparently have a 'dirty' signal on the speedo sensor on my Brozz 250. It was suggested I get some 0.1uf capacitors to 'clean it up'. I would have thought that for 80.00 they could have sent me a .25 component or three. After about 7.00 I have some coming tomorrow so I guess we shall see what they do. Hope it fixes it.
|
|
|
08-28-2021, 08:31 PM
|
#17 | |
|
Join Date: Oct 2020
Location: Southeast Michigan
Posts: 100
|
Quote:
I started having that issue with my Speedodrd. When starting the bike, the speed would go crazy, 3 digit numbers flashing as fast as it could go. Of course adding miles on the OD as well. It would stop if I moved the bike around, most of the time, else I would shut it down. I talked to the company support and he pretty much gave me the, it's a chinese bike electrical noise issue. He suggested a capacitor in the circuit might clean it up. Anyway, I have it off now. I'm not sure what to do with it. I was looking at the digital cluster that Stewbrash purchased because the wheel diameter can be programmed. Which I think is likely the problem all along. I think there might be a link here somewhere, but haven't found it yet. John |
|
|
|
|
08-31-2021, 12:46 PM
|
#18 |
Join Date: Oct 2016
Posts: 405
|
John...it you're needing the link to the Speedometer...here you go:
https://www.aliexpress.com/item/1005...%2223416%22%7D |
|
|
|
08-31-2021, 12:48 PM
|
#19 |
|
Join Date: Oct 2016
Posts: 405
|
JohnC, here's the link to the adjustable speedo:https://www.aliexpress.com/item/1005...%2223416%22%7D
|
|
|
|
08-31-2021, 03:17 PM
|
#20 |
|
Join Date: Oct 2016
Posts: 405
|
Here's a different style:https://www.aliexpress.com/item/1005...%2223416%22%7D
|
|
|
|
|
|
 |
|
|
Linear Mode
