![]() |
#16 |
Join Date: Apr 2020
Posts: 15
|
Also, bog only happens at > 1/4 throttle. Comes cleanly off idle with the needle in the lowest position but after 1/4 throttle just lean bogs. Maybe I need a richer needle taper or larger main?
|
![]() |
![]() |
#17 |
Join Date: Apr 2020
Posts: 15
|
With the airscrew all the way in the bog doesn't seems to be as bad, so I assume larger pilot or greater needle taper?
|
![]() |
![]() |
#18 |
Join Date: Aug 2009
Posts: 521
|
If you're using the 17.5, and the air screw is almost all the way IN, you need to go to a #20 or a #22.5 pilot jet, and reset the air screw to 1.5 turns OUT, and then fine tune from there.
|
![]() |
![]() |
#19 | |
Join Date: Sep 2020
Posts: 7
|
Quote:
|
|
![]() |
![]() |
#20 | |
Join Date: Aug 2021
Posts: 5
|
Quote:
|
|
![]() |
|
![]() |
![]() |
|
|