04-15-2020, 05:46 AM | #1 |
Join Date: Feb 2020
Posts: 4
|
Zstar 250 engine into 2008 KFX 450r
Cracked the frame on the zstar and 450r motor wont be built for a few months now!
So heres what i came up with..... |
|
04-15-2020, 01:27 PM | #2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I think I understand; you're putting the Zstar motor into the Kawasaki frame. Is that right?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
04-17-2020, 11:30 AM | #3 |
Join Date: Feb 2020
Posts: 4
|
that was plan except i miscalculated the carb clearance cause kfx has fuel injection
|
|
04-17-2020, 11:31 AM | #4 |
Join Date: Feb 2020
Posts: 4
|
so welding the zstar frame and see if it hold up this time
|
|
04-17-2020, 12:35 PM | #5 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
It'd be tough to sleeve those corners without a bender, but it's workable with some heat and patience. I've used random pulleys in a vice to bend tubing like that.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|