Orion RXB 125XL Street Legal MANUAL Pit Bike - Page 4

Indianaman · 11-04-2019, 10:03 AM

Do you have a link to the facebook group? I haven't been able to find it

imapdog · 11-04-2019, 03:06 PM

428

chain:
114 link

front:
15t
17mm
30mm holes

rear:
41t
90mm 4 hole
Name: IMG-2666.jpg
Views: 1800
Size: 93.4 KB

Name: IMG-2667.jpg
Views: 1808
Size: 92.2 KB

Name: IMG-2668.jpg
Views: 1782
Size: 87.9 KB

imapdog · 11-05-2019, 03:36 PM

Name: 75442995_10157952609833760_4210268028367011840_n.jpg
Views: 2212
Size: 96.1 KB

Indianaman · 11-08-2019, 10:24 PM

Those 14’s look awesome! I wonder what wheel he used? Do you think it would be an easy swap? That doesn’t look like the oe rotor, or is it?

culcune · 11-09-2019, 12:35 AM

Quote:

Originally Posted by Indianaman

Those 14’s look awesome! I wonder what wheel he used? Do you think it would be an easy swap? That doesn’t look like the oe rotor, or is it?

I might be completely ignorant, but I am guessing one of Orion's smaller pitbikes with a 14" front wheel could be a reliable replacement to swap in for the stock 17".

imapdog · 11-11-2019, 09:49 AM

428 17t works/mounts with 118link chain.
much more sustainable in traffic now, and
1st gear is usable now! and 4th is a good happy place.
i noticed a huge improvement in timing, steady idle,
and started easier once i replaced the crappy cdi/coil.
much more power! this is first time i have replaced a cdi,
but replace your stock one and thank me later.
$40 for all these mods and very easy to replace them.
Name: A02E9434-D76F-4A32-B755-954754D0B848.jpg
Views: 1694
Size: 11.5 KB

Name: A02E9434-D76F-4A32-B755-954754D0B848.jpg
Views: 1694
Size: 11.5 KB

**JerryHawk250** · 11-11-2019, 11:08 AM

Glad to see the CDI worked for you.

The racing CDI's seem to work great on the 125cc and gy6 engine. Too bad they don't work well on the CG250. I've never tried one personally but if you read post on here from the CG250 members that have tried them it was a waste of money.

imapdog · 11-11-2019, 11:19 AM

reused the stock mounting rubber band too.
Name: 02D7664A-F6BC-4167-9C44-D478DEEE32ED.jpg
Views: 1815
Size: 16.6 KB

**JerryHawk250** · 11-11-2019, 11:20 AM

Quote:

Originally Posted by imapdog

reused the stock mounting rubber band too.
Attachment 19260

Wow! the stock CDI is tiny.

imapdog · 11-11-2019, 11:41 AM

Quote:

Originally Posted by JerryHawk250

Wow! the stock CDI is tiny.

i noticed the difference on first kick! i almost started to start the valve tappet adjustment. it idles very well and steady now. and i may wait until 500 miles to adjust valve tappet.

imapdog · 11-11-2019, 11:49 AM

i knew i kept this new old stock burrito tube for another day.
there were holes used and unused ready for it. lol
Name: F0CA57EA-5930-4D26-9935-9EFCCBA847AF.jpg
Views: 1784
Size: 19.7 KB

Name: F0CA57EA-5930-4D26-9935-9EFCCBA847AF.jpg
Views: 1784
Size: 19.7 KB

Name: 83A20226-66D9-47B6-9AE7-6FF24A57E47E.jpg
Views: 1663
Size: 17.5 KB

PhildoScaggins · 11-11-2019, 03:11 PM

Quote:

Originally Posted by imapdog

i knew i kept this new old stock burrito tube for another day.
there were holes used and unused ready for it. lol

That will be handy when you put the gas guzzlin' 190 in it!

imapdog · 11-20-2019, 12:44 PM

here are some pics to keep yall pit-bikers entertained.
still running strong(48 miles)! startin easy and all...
Name: IMG-2899.jpg
Views: 2500
Size: 96.4 KB

Name: IMG-2894.jpg
Views: 1854
Size: 95.6 KB

Name: IMG-2901.jpg
Views: 1537
Size: 95.5 KB

Name: IMG-2897.jpg
Views: 1465
Size: 94.5 KB

Name: IMG-2902.jpg
Views: 1446
Size: 95.2 KB

Goob · 02-23-2020, 07:18 PM

Quote:

Originally Posted by imapdog

Orion RXB 125XL Street Legal MANUAL Pit Bike: Got me tags today! cant wait to get home and figure out a mount and tags-illumination light mod.
Attachment 19064

My RXB150 will be arriving this week. I am going to try to plate in Colorado.

How did Tennessee arrive at the Make & Model on your registration? Is this just what was on the MCO?

My other bike is a CSC TT250 and Colorado registered it as a Zongshen TT250. So, it seems like this bike would be (for me) Make: Zhejiang, Model: RXB150XL.

imapdog · 02-23-2020, 07:38 PM

Quote:

Originally Posted by Goob

My RXB150 will be arriving this week. I am going to try to plate in Colorado.

How did Tennessee arrive at the Make & Model on your registration? Is this just what was on the MCO?

My other bike is a CSC TT250 and Colorado registered it as a Zongshen TT250. So, it seems like this bike would be (for me) Make: Zhejiang, Model: RXB150XL.

i dont think it was in the system and she manually entered it into the system. the make may have been in there but the very least she entered the model.
i dont remember the mco but i think this title is exactly as the mco.
Name: IMG-3782.jpg
Views: 1365
Size: 95.7 KB

Name: IMG-3782.jpg
Views: 1365
Size: 95.7 KB

11-04-2019, 03:06 PM	#47
imapdog Join Date: Feb 2018 Location: nashville Posts: 574	stock sprockets and chain links 428 chain: 114 link front: 15t 17mm 30mm holes rear: 41t 90mm 4 hole Last edited by imapdog; 11-05-2019 at 12:25 PM.
	1

11-05-2019, 03:36 PM	#48
imapdog Join Date: Feb 2018 Location: nashville Posts: 574	someone beat me to it ~ 14"/14"
	3

11-11-2019, 09:49 AM	#51
imapdog Join Date: Feb 2018 Location: nashville Posts: 574	simple-mods 428 17t works/mounts with 118link chain. much more sustainable in traffic now, and 1st gear is usable now! and 4th is a good happy place. i noticed a huge improvement in timing, steady idle, and started easier once i replaced the crappy cdi/coil. much more power! this is first time i have replaced a cdi, but replace your stock one and thank me later. $40 for all these mods and very easy to replace them.
	1

11-11-2019, 11:08 AM	#52
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,561	Glad to see the CDI worked for you. The racing CDI's seem to work great on the 125cc and gy6 engine. Too bad they don't work well on the CG250. I've never tried one personally but if you read post on here from the CG250 members that have tried them it was a waste of money. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

11-11-2019, 11:19 AM	#53
imapdog Join Date: Feb 2018 Location: nashville Posts: 574	from this cdi to this cdi reused the stock mounting rubber band too.
	1

11-04-2019, 10:03 AM	#46
Indianaman Join Date: Sep 2019 Location: Georgia Posts: 62	Do you have a link to the facebook group? I haven't been able to find it
	0

11-08-2019, 10:24 PM	#49
Indianaman Join Date: Sep 2019 Location: Georgia Posts: 62	Those 14’s look awesome! I wonder what wheel he used? Do you think it would be an easy swap? That doesn’t look like the oe rotor, or is it?
	0

11-11-2019, 11:49 AM	#56
imapdog Join Date: Feb 2018 Location: nashville Posts: 574	burrito tube love i knew i kept this new old stock burrito tube for another day. there were holes used and unused ready for it. lol
	3

11-20-2019, 12:44 PM	#58
imapdog Join Date: Feb 2018 Location: nashville Posts: 574	not selling yet, well at least till march~hopefully not then either here are some pics to keep yall pit-bikers entertained. still running strong(48 miles)! startin easy and all...
	3