09-16-2019, 09:20 PM | #1 |
Join Date: Sep 2019
Posts: 2
|
125cc Taotao Timing Chain install
After I took off my starter to bench test it and put it all back and tried to start it I notice the chain came off and now I can’t get back on. I doesn’t fit through the sleeve.
|
|
09-17-2019, 02:09 PM | #2 |
Join Date: May 2009
Location: SASKATOON
Posts: 1,161
|
chain
check youtube for video on how to change starter or to change the chain... turn flywheel by hand after installation.... BEFORE YOU PUT IT BACK TOGETHER... to make sure the chain is fully on the gears...
__________________
DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC |
|
09-18-2019, 05:36 PM | #3 |
Join Date: Sep 2019
Posts: 2
|
I was not able to find a good video on how to do this.
|
|
09-19-2019, 11:30 AM | #4 |
Join Date: May 2009
Location: SASKATOON
Posts: 1,161
|
Chain
This is not the timing chain... search how to replace starter.. you might have to take the gear off of the starter then put the chain on the flywheel gear... then onto the starter drive gear.... re-install the gear on the starter drive( or remove and re-install the starter again) and once finished,,, turn the flywheel by hand to make sure you have the chain on right,,, see videos on rebuilding the motors…. there is a lot of then to see and show you.. strange that you can not see any...???
__________________
DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC |
|
09-20-2019, 08:55 AM | #5 |
Join Date: Aug 2019
Location: Bay City, MI
Posts: 397
|
Yeah that doesn't look like a timing chain...
|
|
|
|
|
|