Engine help please!

Bruce's · 04-16-2018, 04:16 PM

It’s probably not leaking because of the threads as long as they are solid ,it’s more than likely the intake is cracked ,or the gasket is not sealing properly

bikehelp · 04-16-2018, 07:50 PM

Quote:

Originally Posted by Bruce's

It’s probably not leaking because of the threads as long as they are solid ,it’s more than likely the intake is cracked ,or the gasket is not sealing properly

No it's not cracked, Its this bolt, I covered the area with my figure and the noise stops.
So i just put a little black high temp silicon around that bolt gap. Will see tomorrow.

Hellkitty · 04-16-2018, 08:41 PM

That looks like a 125cc engine found on Taotao products. Probably a 54x54 square bore. Is that a Taotao Hellcat?

lonfu · 04-16-2018, 08:53 PM

Looks like your bolt is cross threaded. I would pull it and re- thread the hole to see if you can save it with out a heli-coil.

04-16-2018, 08:53 PM	#4
lonfu Join Date: Feb 2008 Location: kingman az Posts: 34	Looks like your bolt is cross threaded. I would pull it and re- thread the hole to see if you can save it with out a heli-coil. __________________ 2007 4x4 300 buyang atv <br />2009 4x4 300 Buyang atv<br />1985 yamaha v-max/2009 fuel inj Yamaha Rhino
	2

04-16-2018, 04:16 PM	#1
Bruce's Join Date: Apr 2015 Location: Sudbury ,Ontario Posts: 855	It’s probably not leaking because of the threads as long as they are solid ,it’s more than likely the intake is cracked ,or the gasket is not sealing properly
	0

04-16-2018, 08:41 PM	#3
Hellkitty Join Date: Dec 2017 Posts: 216	That looks like a 125cc engine found on Taotao products. Probably a 54x54 square bore. Is that a Taotao Hellcat?
	0