04-08-2018, 01:42 PM | #1 |
Join Date: Feb 2018
Posts: 25
|
Engine noise
IT does this rattling noise once it is warmed up and at a certain rpm anyone know what it is? Valves are adjusted
Heres a video |
|
04-09-2018, 06:34 PM | #2 |
Join Date: Feb 2018
Posts: 25
|
Does noone know? I don't mind fixing it just would like ideas on what it could be.
|
|
04-09-2018, 06:42 PM | #3 |
Join Date: Sep 2014
Posts: 1,929
|
Lousy speaker on my tablet so hard to tell. You say valves are adjusted but are you sure it was done right?
|
|
04-09-2018, 06:47 PM | #4 |
Join Date: Feb 2018
Posts: 25
|
Yes I followed the guide posted on here done it 10 different times to make sure it was right.
|
|
04-09-2018, 10:48 PM | #5 |
Join Date: May 2009
Location: SASKATOON
Posts: 1,161
|
noise
check oil for metal.... was it ever changed to the 10-40 oil ??? that is a good start ..
__________________
DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC |
|
04-10-2018, 07:18 AM | #7 |
Join Date: Feb 2018
Posts: 25
|
I changed the oil twice since I bought it i used 15w40 i haven't seen any metal in the oil
|
|
04-10-2018, 08:00 AM | #8 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,713
|
It sounds normal to me. All I heard is the normal taping of the valves.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
04-10-2018, 08:54 AM | #9 |
Join Date: Feb 2018
Posts: 25
|
So there that loud in these motors? I have never heard valves as loud as the sound i hear from it i work on motors all the time but not air cooled pushrod engines.
|
|
04-10-2018, 09:11 AM | #10 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,713
|
Yes they will be a little noisy. What do you have them set at. I have mine set at .002" intake and .003" exhaust.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
04-10-2018, 09:41 AM | #11 |
Join Date: Feb 2018
Posts: 25
|
There Both at 003
|
|
04-10-2018, 10:01 AM | #12 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,713
|
You will be good at that. When you stop hearing the tapping you will know it's time to adjust valves.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
04-10-2018, 10:08 AM | #13 |
Join Date: Feb 2018
Posts: 25
|
Is there a place to buy crankshafts for these engines in the event that something does go wrong it seems to be the only part I cant find?
|
|
04-10-2018, 10:12 AM | #14 | |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,713
|
Quote:
Just have to check measurements to make sure you are getting the right parts.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
04-10-2018, 10:15 AM | #15 | |
Join Date: Feb 2018
Posts: 25
|
Quote:
|
|
|
|
|
|
|