Coolster 150 will not turn over

Numbrseven · 07-02-2017, 08:20 PM

OK, I went out to try some things: I took the light switch/start button housing apart and I found a broken wire at the solder connection. It was the solid brown wire that looks like it connects to the light switch - all the way at the top of the switch. But the lights worked even when it was disconnected. Anyway, I reconnected that wire and tried to crank it. No such luck. What does that brown wire do? While I was in there, I ohmed out the start button and it seems to work fine. OL when not pressed - Ohm reading when pressed ( I think it was around 4 ohms?). Just for funsies I swapped out the voltage regulator, cdi, coil, battery and solenoid from my other working ATV. Made no difference. No clicking, not turning over, no nothing.

07-02-2017, 08:20 PM	#2
Numbrseven Join Date: Nov 2016 Location: Florida Boy Posts: 89	OK, I went out to try some things: I took the light switch/start button housing apart and I found a broken wire at the solder connection. It was the solid brown wire that looks like it connects to the light switch - all the way at the top of the switch. But the lights worked even when it was disconnected. Anyway, I reconnected that wire and tried to crank it. No such luck. What does that brown wire do? While I was in there, I ohmed out the start button and it seems to work fine. OL when not pressed - Ohm reading when pressed ( I think it was around 4 ohms?). Just for funsies I swapped out the voltage regulator, cdi, coil, battery and solenoid from my other working ATV. Made no difference. No clicking, not turning over, no nothing.
	0