|
|
|
|
Thread Tools | Search this Thread | Display Modes |
|
04-06-2017, 10:52 PM | #1 |
Join Date: Dec 2016
Location: Western PA
Posts: 363
|
The hub is very soft. I was surprised how easily I could drill out the hole, It was like wood. and the tap cut the metal very easily too. I spent a lot of time cleaning the bolts and chasing out the holes as I think a lot of swarf was in them.
I didn't loctite the old ones, just the helicoil.I did tighten to 35ft.lb very, very carefully and they've been fine. These things happen on bikes but it's always a pain when you don't have the bits you need available. |
|
|
|
Tags |
sprocket, stripped, tt250 |
|
|