Artic Cat Climber minibike. - Page 10

Weldangrind · 07-20-2015, 11:32 AM

It looks great!

On the mini that I built, I used the mounts that are around the crankshaft to attach brackets. I fastened a drilled plate to the brackets to create a clutch guard. I didn't worry about the exhaust, since it routed straight back like yours.

SpudRider · 07-20-2015, 12:23 PM

Quote:

Originally Posted by katoranger

I did spray carb cleaner and it fired. Rode it about 4 feet.

katoranger · 07-20-2015, 01:51 PM

We got it done at 10am. I test rode it around the yard and then loaded it up and had it to the fair by 1045. I do plan to change the clutch guard. Too bulky.

katoranger · 07-20-2015, 02:19 PM

She got a purple ribbon and is in the running for state fair.

SpudRider · 07-21-2015, 01:40 AM

That's great.

**cheesy** · 07-21-2015, 08:27 AM

Weldangrind · 07-21-2015, 11:12 AM

Awesome! So glad it worked out for you guys.

MICRider · 07-21-2015, 11:35 PM

Looks great! I really like the green

Nice to see it's a family project as well, time well spent.

katoranger · 07-23-2015, 10:20 PM

They can't wait for the fair to be over so that we can bring it home and ride.

katoranger · 06-04-2016, 10:57 PM

Minibike is getting honda power. $20 power washer. Engine runs great. Cheaper than a replacement carb for the tecumseh.

katoranger · 06-05-2016, 09:18 AM

My wife bought this for me at an auction. $20 Engine runs good. Bad pump.

BlackBike · 06-05-2016, 05:07 PM

I think I see 8hp on the label? Mabey weld up a powered hand truck for your business instead of a mini bike. Labor saving device.

Weldangrind · 06-06-2016, 12:30 AM

I'm pretty sure that's a 5hp GC160. Excellent score! Kato, you have the perfect wife. Go buy her some chocolate.

MICRider · 06-06-2016, 11:45 AM

Excellent deal! Those Hondas purr like a kitten

.

katoranger · 06-07-2016, 12:06 PM

It is a 5hp. I have a 14hp kohler with a hydraulic pump and wheel motors that I might be able to make a toter machine from.

07-20-2015, 11:32 AM	#136
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	It looks great! On the mini that I built, I used the mounts that are around the crankshaft to attach brackets. I fastened a drilled plate to the brackets to create a clutch guard. I didn't worry about the exhaust, since it routed straight back like yours. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

07-20-2015, 01:51 PM	#138
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	We got it done at 10am. I test rode it around the yard and then loaded it up and had it to the fair by 1045. I do plan to change the clutch guard. Too bulky. __________________ You meet the nicest people on a Honda Clone.
	0

07-20-2015, 02:19 PM	#139
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	She got a purple ribbon and is in the running for state fair. __________________ You meet the nicest people on a Honda Clone.
	0

07-21-2015, 01:40 AM	#140
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	That's great. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

07-21-2015, 08:27 AM	#141
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,973	__________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0

07-21-2015, 11:12 AM	#142
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Awesome! So glad it worked out for you guys. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

07-21-2015, 11:35 PM	#143
MICRider Join Date: Oct 2009 Location: Alberta, Canada Posts: 3,274	Looks great! I really like the green Nice to see it's a family project as well, time well spent.
	0

07-23-2015, 10:20 PM	#144
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	They can't wait for the fair to be over so that we can bring it home and ride. __________________ You meet the nicest people on a Honda Clone.
	0

06-04-2016, 10:57 PM	#145
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Minibike is getting honda power. $20 power washer. Engine runs great. Cheaper than a replacement carb for the tecumseh. __________________ You meet the nicest people on a Honda Clone.
	4

06-05-2016, 05:07 PM	#147
BlackBike Join Date: Feb 2016 Location: George West, Texas Posts: 4,097	I think I see 8hp on the label? Mabey weld up a powered hand truck for your business instead of a mini bike. Labor saving device. __________________ ***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
	0

06-06-2016, 12:30 AM	#148
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I'm pretty sure that's a 5hp GC160. Excellent score! Kato, you have the perfect wife. Go buy her some chocolate. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

06-06-2016, 11:45 AM	#149
MICRider Join Date: Oct 2009 Location: Alberta, Canada Posts: 3,274	Excellent deal! Those Hondas purr like a kitten .
	0

06-07-2016, 12:06 PM	#150
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	It is a 5hp. I have a 14hp kohler with a hydraulic pump and wheel motors that I might be able to make a toter machine from. __________________ You meet the nicest people on a Honda Clone.
	0