Looking for interest in custom made aluminum luggage for RX3

Danimal · 12-16-2015, 05:00 PM

Am putting out a feeler, and this forum IS the place to do it.

Am associated with a person who constructs custom aluminum luggage for various dual sport bikes.

He has just finished a prototype rack and rear bag setup for the RX3

Pricing is not determined yet, but should be significantly less than a Tourfella set. Part of the system uses part of the stock racking to ease assembly.

He sent pictures of the prototype which I will post here later after my phone uploads to Photobucket.

So...to those who feel the stock plastic bags aren't big enough (me), chime in here

rjmorel · 12-16-2015, 05:05 PM

I would be interested in at least seeing them. May or may not actually go that route though in the end. rj

SpudRider · 12-16-2015, 05:49 PM

Please do post photos of the prototype. I'm sure many of our forum members are interested. I'm particularly interested in the mounting system. A common flaw with all the current pannier mounts I have seen is the placement of a forward strut which connects to the bottom of the passenger foot pegs. I would like to see the mounts connect to the top of the passenger foot pegs, on the subframe of the motorcycle.

keithmaine · 12-16-2015, 06:38 PM

Is it tinman??

tinman tim · 12-16-2015, 08:32 PM

Shhh

Danimal · 12-16-2015, 09:19 PM

Quote:

Originally Posted by tinman tim

Shhh

Oh...rigggggght...gotcha

Never mind.

Move along.

Nothing to see here.

Quit rubbernecking.

Danimal · 12-16-2015, 09:20 PM

Danimal · 12-16-2015, 09:24 PM

SpudRider · 12-16-2015, 09:39 PM

Quote:

Originally Posted by tinman tim

Shhh

Welcome, Tim. We are glad you joined us.

Please tell us more about the mounting system.

tinman tim · 12-16-2015, 10:38 PM

Thanx Spud. Been lurking here for awhile

Rack itself consists of three pieces. A large horizontal 'hoop', and two small 'prop' bars.
Panniers are 18x14x8

As shown above, they're mounted as far forward as possible which requires the stock crash bars to be removed.

Things are still in the proto-type stage for now, but i'm looking for interest/feedback to see if there's a market. As I did the same type set-up for the TW200 community, I'm kinda looking to do it for the Rx3.
That being said, I'm just a guy with a bunch of tools that likes to tinker in the garage.

Question I did have is, does anyone know the load capacity of the stock luggage?

SpudRider · 12-16-2015, 10:58 PM

Quote:

Originally Posted by tinman tim

...Question I did have is, does anyone know the load capacity of the stock luggage?

The RX3 subframe is very strong, but I don't know the official load capacity for the subframe. I suggest you query CSC for this information; they can provide the definitive answer.

AZRider · 12-16-2015, 11:25 PM

I like these panniers and would be in the market for a set. My question would be how many riders need that much capacity. Most seem to use the RX-3 for off-roading where weight is a factor. My use would be for back road touring and camping and for that they would be ideal.

RedHawk47 · 12-17-2015, 12:18 AM

Tim,
It looks like you have all of the right tools for this project.
I would like a tool box like this that fits the Tourfella racks. It would need clearance for the pannier mounting system:
http://www.advdesigns.com/rurelotoforb1.html
Thanks,

Danimal · 12-17-2015, 12:31 AM

Quote:

Originally Posted by AZRider

I like these panniers and would be in the market for a set. My question would be how many riders need that much capacity. Most seem to use the RX-3 for off-roading where weight is a factor. My use would be for back road touring and camping and for that they would be ideal.

They may be lighter than the stock plastic

Weldangrind · 12-17-2015, 01:07 AM

Tim, that's really nice work. Those panniers look right at home on the RX3.

12-16-2015, 05:00 PM	#1
Danimal Banned Join Date: Sep 2015 Posts: 176	Looking for interest in custom made aluminum luggage for RX3 Am putting out a feeler, and this forum IS the place to do it. Am associated with a person who constructs custom aluminum luggage for various dual sport bikes. He has just finished a prototype rack and rear bag setup for the RX3 Pricing is not determined yet, but should be significantly less than a Tourfella set. Part of the system uses part of the stock racking to ease assembly. He sent pictures of the prototype which I will post here later after my phone uploads to Photobucket. So...to those who feel the stock plastic bags aren't big enough (me), chime in here
	0

12-16-2015, 05:05 PM	#2
rjmorel Join Date: May 2007 Location: Warshington Posts: 928	I would be interested in at least seeing them. May or may not actually go that route though in the end. rj __________________ Live Zong, and Prosper
	0

12-16-2015, 05:49 PM	#3
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Please do post photos of the prototype. I'm sure many of our forum members are interested. I'm particularly interested in the mounting system. A common flaw with all the current pannier mounts I have seen is the placement of a forward strut which connects to the bottom of the passenger foot pegs. I would like to see the mounts connect to the top of the passenger foot pegs, on the subframe of the motorcycle. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

12-16-2015, 06:38 PM	#4
keithmaine Join Date: Oct 2015 Location: White Mtns. NH Posts: 488	Is it tinman?? __________________ 2016 Versys 650 LT, 2015 RX3 Red, 2011 Ural GearUp,
	0

12-16-2015, 11:25 PM	#12
AZRider Join Date: Jan 2015 Location: Phoenix, AZ Posts: 267	I like these panniers and would be in the market for a set. My question would be how many riders need that much capacity. Most seem to use the RX-3 for off-roading where weight is a factor. My use would be for back road touring and camping and for that they would be ideal. __________________ George 2016 CanAm Spyder F3-L
	0

12-16-2015, 08:32 PM	#5
tinman tim Join Date: Oct 2015 Posts: 30	Shhh
	0

12-16-2015, 09:20 PM	#7
Danimal Banned Join Date: Sep 2015 Posts: 176
	0

12-16-2015, 09:24 PM	#8
Danimal Banned Join Date: Sep 2015 Posts: 176
	0

12-16-2015, 10:38 PM	#10
tinman tim Join Date: Oct 2015 Posts: 30	Thanx Spud. Been lurking here for awhile Rack itself consists of three pieces. A large horizontal 'hoop', and two small 'prop' bars. Panniers are 18x14x8 As shown above, they're mounted as far forward as possible which requires the stock crash bars to be removed. Things are still in the proto-type stage for now, but i'm looking for interest/feedback to see if there's a market. As I did the same type set-up for the TW200 community, I'm kinda looking to do it for the Rx3. That being said, I'm just a guy with a bunch of tools that likes to tinker in the garage. Question I did have is, does anyone know the load capacity of the stock luggage?
	0

12-17-2015, 12:18 AM	#13
RedHawk47 Join Date: Oct 2015 Location: Berthoud, CO Posts: 205	Tim, It looks like you have all of the right tools for this project. I would like a tool box like this that fits the Tourfella racks. It would need clearance for the pannier mounting system: http://www.advdesigns.com/rurelotoforb1.html Thanks, __________________ Dan CSC RX3 Cyclone, CSC TT250, Moto Guzzi V7 II, KLR650
	0

12-17-2015, 01:07 AM	#15
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Tim, that's really nice work. Those panniers look right at home on the RX3. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0