11-19-2015, 08:24 PM | #31 |
Join Date: Sep 2014
Location: Orange County, CA
Posts: 410
|
Many thanks to Winyoochanok! I received the windshield in under 2 weeks! Clearly Winyoochanok take pride in making them! It was well wrapped, well packaged and protected, and the screen fits well.
In contrast, I also received today an aviation handheld radio from an auction website and the seller sent it in a shoebox with no bubble wrap of any kind! It bounced around and put scratches into the acrylic screen and a deep gouge in the black plastic case. Talk about night and day difference between Winyoochanok and his pride in workmanship vs. the seller of the radio. I haven't taken the bike for a ride yet, but I can already see that it will send a lot more wind around me than the stock windscreen. When I get a chance to take it for a ride, I'll report back on whether any buffeting to the shoulders still occurs. |
|
11-19-2015, 11:40 PM | #32 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Thanks for reporting the excellent customer service. Please do report back after you have a chance to test the wind protection.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
11-20-2015, 01:55 AM | #33 |
Join Date: Sep 2014
Location: Arvada, CO
Posts: 1,004
|
I agree. Winyoochanok is a true craftsman and top quality fabricator.
__________________
Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol |
|
11-20-2015, 09:44 PM | #34 |
Join Date: Oct 2015
Posts: 47
|
Very proud to do business with you. |
|
11-21-2015, 11:47 AM | #35 |
Join Date: Sep 2014
Location: Orange County, CA
Posts: 410
|
Only a quick ride this morning, but I can report that Winyoochanok's windshield, as Detours reported, does divert a good amount of air around the shoulders and over the helmet. Buffeting is reduced, and the bike is steady at speed (reinforcing that the steering head wobble is rider induced.)
I sit taller than most (long torso), but found the windshield helped direct a good amount of air over the helmet, but enough air still came over the windshield to help direct fresh air to me. I had worried that I might need to switch to the stock windscreen in summer... but as of now, I think this windshield is good for all seasons. |
|
11-21-2015, 02:02 PM | #36 | |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Quote:
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
11-23-2015, 01:42 PM | #38 |
Join Date: May 2007
Location: Warshington
Posts: 928
|
Winyoo is that a kickstand foot I see on your bike in the above pic???? rj
__________________
Live Zong, and Prosper |
|
11-25-2015, 11:39 AM | #39 | |
Join Date: Oct 2015
Posts: 47
|
Quote:
|
|
|
11-25-2015, 02:59 PM | #40 |
Join Date: May 2007
Location: Warshington
Posts: 928
|
Do you make them or have a link for them? thanks, rj
__________________
Live Zong, and Prosper |
|
12-15-2015, 08:52 AM | #41 |
Join Date: Dec 2015
Location: Coastal NC
Posts: 537
|
that's a nice windscreen, I wonder if I can adapt it to fit my 2008 versys. maybe get one with no holes drilled.
|
|
12-15-2015, 01:08 PM | #42 |
Join Date: Oct 2015
Location: FL, GA, NC
Posts: 771
|
I would be interested also. Nearly had a tip over or two in the soft FL sand.
jb
__________________
2016 Honda CB500F......2017 Triumph Street Twin 2014 XT 250........ |
|
01-01-2016, 07:55 PM | #43 |
Join Date: Oct 2015
Location: Berthoud, CO
Posts: 205
|
I prefer a clear windscreen rather than a tinted one so I asked Winyoochanok if he would make one for me. No problem; quick delivery.
but hard to photograph. Snow on the road and too cold to ride, so I haven't tried it out yet. The front brake master cylinder does bump the windscreen before the hardstop. Probably not a real problem. I sit tall also; if the screen doesn't get the wind above my helmet I will add a X-creen - from Twisted Throttle.
__________________
Dan CSC RX3 Cyclone, CSC TT250, Moto Guzzi V7 II, KLR650 |
|
01-01-2016, 11:36 PM | #44 |
Join Date: Sep 2014
Location: Arvada, CO
Posts: 1,004
|
Looks awesome in clear, redhawk! My brake cylinder bumps too, but only at full lock and it hasn't been a problem for me.
__________________
Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol |
|
01-02-2016, 12:20 AM | #45 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
X2; the clear windshield looks great.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
|
|
|