Go Back   ChinaRiders Forums > Technical/Performance > Pit/Pocket Bikes & Scooters
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 03-29-2012, 11:31 PM   #1
markcrim   markcrim is offline
 
Join Date: Mar 2012
Posts: 6
125cc Lifan engine charging problem

Hi, all. New to the site.

I've put a Lifan 125cc engine (model 1P54FMI) in an old Honda bike (C100), and am having trouble with the charging/lighting system. In short, it doesn't provide enough electricity to run the lights and charge the battery, so the battery drains.

I've replaced the rectifier/regulator, and with the new one installed (yellow and white wires from stator on the lower-left and upper-right terminals, ground on the lower right, and the upper-left terminal is the DC output), at idle I get less than 4VDC on the output terminal even with nothing but the multimeter connected to that terminal. It's not much better if I rev the engine. And I measure between 5.5 and 7.3 VAC at the (yellow and white) stator wires coming into the rectifier/regulator.

Does this sound like a bad charging/lighting stator coil?

Thanks for any advice---I'd really like to get this thing on the street!

Mark


 
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:52 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.