Dragon Chopper (3/4 chopper)

Forklift352 · 10-02-2008, 02:55 PM

I know I know I suck!! my technology for that sort of thing needs
to be upgraded.But soon Ill get it up!!
As for the needle adjustment It helped a lot...However so did a 105 main
jet.(I would like to see a DIY on the other jets!!! :P )Now as the main jet
gets bigger to the point of running to rich you would want to reverse that
mod(take clip up a notch or two)I didn't realise how lean I was running.
So 105 main jet and needle mod seem to work great,as well as a hot
wire!!!!The way I see it because of the hot wire I might bump to a
108 :twisted:

No, no front 17T 20mmx17mmx5mm sprocket yet I got to put that on hold.
Because of the Jack shaft I would have to get two 17T 17mmx14mmx?
The last time I ordered a sprocket from scooterparts4less(good inventory)
they don't have inner diameter tooth size so I got one that don't fit.
As soon as I get the jet thing and air filter Will focus on sprockets :twisted:

10-02-2008, 02:55 PM	#11
Forklift352 Join Date: Sep 2008 Location: Salem ,Oregon Posts: 121	I know I know I suck!! my technology for that sort of thing needs to be upgraded.But soon Ill get it up!! As for the needle adjustment It helped a lot...However so did a 105 main jet.(I would like to see a DIY on the other jets!!! :P )Now as the main jet gets bigger to the point of running to rich you would want to reverse that mod(take clip up a notch or two)I didn't realise how lean I was running. So 105 main jet and needle mod seem to work great,as well as a hot wire!!!!The way I see it because of the hot wire I might bump to a 108 :twisted: No, no front 17T 20mmx17mmx5mm sprocket yet I got to put that on hold. Because of the Jack shaft I would have to get two 17T 17mmx14mmx? The last time I ordered a sprocket from scooterparts4less(good inventory) they don't have inner diameter tooth size so I got one that don't fit. As soon as I get the jet thing and air filter Will focus on sprockets :twisted:
	0