Go Back   ChinaRiders Forums > Technical/Performance > Adventure Bikes > Zongshen RX4
Register FAQ Community Calendar Today's Posts Search
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 06-26-2022, 06:52 AM   #35
Lukas   Lukas is offline
 
Join Date: Jan 2021
Location: A small Polish empire
Posts: 244
I have removed the trunks and only sometimes screw in the center trunk the bike without the trunks is much lighter and rides better and you should remove them bob, if you do not use them without them you can reduce the spring preload a little to make the bike softer because they do not load the rear of my rx3/4 because it is 300cc, after removing the trunks it became very hard and this is the best proof that they weigh. i am also thinking about changing the front gmol to a smaller one, making the passenger footpegs out of tubes instead of casting and changing the heavy casting on which the central plastic trunk is mounted to the tubular holder for the metal trunk. bob unscrew all the trunks, adjust the suspension and ride without the trunks, the rear of the motorcycle will be leveraged so you can let go of the spring and it will not hit the rear so much on bumps due to the reduced weight.


 
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:50 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.