Brozz 250 Shorty Windshield

[tknj99]

Hi All,
I wanted to add some extra wind protection to the Brozz and started searching for options both on Amazon and via searches on the forum. On the forum there was a suggestion about using a clear 3M face shield, after looking at that I wasnt sold on the look nor was overly worried about exposing the brozz to germs. I scoured Amazon for options that might flow with the lines of the headlight assembly and be somewhat workable to install as no option is direct bolt on that i could find that would be cost effective.. didnt want to spend $100+ on a windshield nor have one thats too tall.
I decided on this one from Amazon and worked on it today. I have attached the pics and if anyone wants to go down this route its a very easy install.

Install:
1. Connect the top bolts only to the metal brackets supplied with the windshield. Finger tighten for now.
2. Remove the top pinch bolts from both forks
3. Attach each bracket to the pinch bolt location and tighten it up
4. Tighten the top bolts on the windshield
5. Attach the bottom bolts to the windshield. These bolts will not connect to anything but serve as aesthetic only so that there is not exposed holes on the windshield


I haven't tested it out yet as the bike is down at the moment awaiting the return of the head from port and polish work, but i'm certain it will help a bit with wind protection and is very solid as mounted. I am also quite pleased with the look, not being overly large and still functional and flowing with the lines of the headlight assembly,
I assume this should also work for the Hawk/TBR etc..

https://www.amazon.com/Motorcycle-Windshield-Windscreen-Compatible-Bonneville/dp/B07X7LFYJ4/ref=pd_di_sccai_11?_encoding=UTF8&pd_rd_i=B07X7LFY J4&pd_rd_r=1295c409-e678-4afb-b50c-7d626f0bf47c&pd_rd_w=EHnnO&pd_rd_wg=sJOAo&pf_rd_p= c9443270-b914-4430-a90b-72e3e7e784e0&pf_rd_r=3KFK00JH838NFYDPX0K8&psc=1&re fRID=3KFK00JH838NFYDPX0K8