Go Back   ChinaRiders Forums > Technical/Performance > Pure Dirt
Register FAQ Community Calendar Today's Posts Search
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 02-11-2018, 11:58 AM   #1
Douglass   Douglass is offline
 
Douglass's Avatar
 
Join Date: Aug 2017
Location: Bay Area, CA
Posts: 375
2017 Apollo 250 RX - Sprocket install

I just installed a new 52T sprocket. Along with it I installed a new 530 O ring Chain. The chain I purchased was a 530 o ring 120 link. I had a company named PBI Sprockets make me the sprocket. It was 80 shipped, and I had the sprocket 3 days after my order was made. It fit perfectly with no issues.

I did not change the front sprocket, and was able to keep the chain gaurd on with no modifications however it is very close to the chain, and I will be making an extension bracket for some addional clearance. This changed my gear ratio from about a 2.73 to a 3.73. The 1st gear is short but usable, but all the gears pull good. I did loose some top end, but never came close to that in the dirt, just when on the street.

* Center bore measured at 58mm
* Bolt hole size is 10.5mm
* Bolt pattern is 4 by 90mm


Sprocket link
http://www.shop.pbisprockets.com/pro...&categoryId=56

Chain link
https://www.ebay.com/itm/530-GOLD-Mo...wAAOSwH2VaA4Cn







Last edited by Douglass; 02-11-2018 at 03:34 PM.
 
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:09 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.