Huawin cheetah 200

jayr · 08-02-2017, 05:58 PM

I'm about finish getting this bike back in shape after sitting for so long.

It already had a PZ30 carb. Added a uni pod filter. Opened the muffler and took out the two silencer in the middle.

Added front led trun signals. And rear led integrated tail light.

I'm having a slight problem with tuning it tough...

It was really hard to start and from idle if I gave the throttle a quick snap it bogs down really bad? it had a 98 main jet and a 40 pilot jet.

Bought a 10pcs jet kit off eBay.
Installed a 125 main jet and 42 pilot jet mix screw set to 1 1/2 turns out. Needle clip in the middle.

Starts up way better. But that bog is still their?

Any recommendations will be appreciated.

08-02-2017, 05:58 PM	#1
jayr Join Date: Jul 2017 Posts: 18	Huawin cheetah 200 I'm about finish getting this bike back in shape after sitting for so long. It already had a PZ30 carb. Added a uni pod filter. Opened the muffler and took out the two silencer in the middle. Added front led trun signals. And rear led integrated tail light. I'm having a slight problem with tuning it tough... It was really hard to start and from idle if I gave the throttle a quick snap it bogs down really bad? it had a 98 main jet and a 40 pilot jet. Bought a 10pcs jet kit off eBay. Installed a 125 main jet and 42 pilot jet mix screw set to 1 1/2 turns out. Needle clip in the middle. Starts up way better. But that bog is still their? Any recommendations will be appreciated.
	2